12 replies to this topic

[redboy]

[attachment=96301:DSC00741.JPG] Hi this is my first post so bare with me. Ive got 12x6 deep dish revolutions and would like to know what arches would be best for them. I dont want arches that stick out too far past the tyre wall but just enough to cover the tyre to be legal. Has anyone got 12x6's on there mini if so what arches have you got and do you have any pictures. i was looking at the gp2 arches from huddersfield spares has anyone got these and do they have any pictures. Cheers

[kitroxin]

How about Wood + Pickett style arches?

I think they look very smart =)

[secondopsman]

I have the same size wheels and i have just fitted some group 5 euros from Abs motorsport.Good fit ,good quality but i did need some 8mm spacers on the rears.Only picture i have sorry
Pete

[redboy]

How about Wood + Pickett style arches?

I think they look very smart =)

I was looking at the ABS plastic replica wood & picket, There 1/4 inch wider than the originals at 2.5" but because ive had to cut the arches for the tyre clearence i dont know if they would fit the new arch size. Think ill have to take a drive down mini spares and try the arches they got against the car.

[redboy]

I have the same size wheels and i have just fitted some group 5 euros from Abs motorsport.Good fit ,good quality but i did need some 8mm spacers on the rears.Only picture i have sorry
Pete

Yea looks good aint seen that website before its quite helpfull cheers

[welshdan]

im having a clearout and have some new group 5 arches on ebay. 99p

http://shop.ebay.co....p;_trksid=p4340

[redboy]

im having a clearout and have some new group 5 arches on ebay. 99p

http://shop.ebay.co....p;_trksid=p4340

Cheers mate but i think they would stick out further than what i want.

[Jim_Jam]

Group two wides with strip

http://www.facebook....mp;id=874130385

[Pauly]

Mine.

6x12 and w&p arches.

[redboy]

Group two wides with strip

http://www.facebook....mp;id=874130385

Cheers for the picture, think this is what ill be going for, they look nice on your mini where did ya get yours from and do you have to make new holes?

[redboy]

Mine.

6x12 and w&p arches.

lovely looking mini did you have trouble making the front ones fit after taking away the front of the arch?

[Jim_Jam]

Group two wides with strip

http://www.facebook....mp;id=874130385

Cheers for the picture, think this is what ill be going for, they look nice on your mini where did ya get yours from and do you have to make new holes?

They are group 2 wides from mini sport with chrome finisher.

Yeah, I had to drill new holes, wasn't a biggie like, just made a guide with a hand operated drill then used an electric one to go through the panel. to be honest with the new 6" wide wheels I had to grind away a few of the old ones to stop it rubbing.

Glad you like it-Jamie

[Pauly]

Mine.

6x12 and w&p arches.

lovely looking mini did you have trouble making the front ones fit after taking away the front of the arch?

A bit, they just about stetched.