Gallileo Gauges - Custom Clock Faces
#1
Posted 17 March 2009 - 11:44 PM
for the full range. The clocks in the big picture are the ones in the night time pics.
Launched a little cottage industry doing custom clock faces.
If you want new faces on your dials let me know...
And check the web site:
http://www.heagren.com/gallileo/
Best wishes
Monty
EDIT - night time pics added
night1.jpg 122.13K 40 downloads
night2.jpg 136.7K 31 downloads
#2
Posted 17 March 2009 - 11:59 PM
Have saved your link in my favorites as i might buy a three clock set in the comeing months, also how hard are these to fit, do they come with fitting diagram for help with fitting ps thanksLaunched a little cottage industry doing custom clock faces.
If you want new faces on your dials let me know...
And check the web site:
http://www.heagren.com/gallileo/
Best wishes
Monty
#3
Posted 18 March 2009 - 10:07 AM
#4
Posted 18 March 2009 - 10:08 AM
Best wishes
Monty
#5
Posted 18 March 2009 - 10:09 AM
(p.s. there is no video to download on installing it :/ ) EDIT: yes there is! i just had to wait a bit
Edited by Coleman, 18 March 2009 - 10:10 AM.
#6
Posted 18 March 2009 - 10:14 AM
#7
Posted 18 March 2009 - 10:17 AM
michael
#8
Posted 18 March 2009 - 11:00 AM
#9
Posted 18 March 2009 - 11:06 AM
#10
Posted 18 March 2009 - 11:46 AM
to see how much interest there is in the basic range. Will add some night pics as soon as it's dark !
Best wishes
Monty
#11
Posted 18 March 2009 - 12:00 PM
#12
Posted 18 March 2009 - 03:28 PM
#13
Posted 18 March 2009 - 06:55 PM
Sorry - it's just too expensive to have them pre-cut.
But they're so easy to do yourself - you don't even have to cut them accurately as all the
cut edges are hidden by the binnacle once they're fitted. The tacho hole is straight so you just need
a craft knife and a ruler and the holes just need a cross cut for the screws / spindle to fit through. Again,
they are hidden once fitted.
I've been negotiating with printers for months to get this off the ground and the die to cut the
faces is just too pricey to allow us to sell at "cheap" prices which is what we want to do.
If things change we will do them pre-cut but for now it's a craft knife and five minutes !
Best wishes
Monty
#14
Posted 18 March 2009 - 07:01 PM
#15
Posted 18 March 2009 - 07:08 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users