Jump to content


Photo

2002 R1 Problem


  • Please log in to reply
2 replies to this topic

#1 1989mini1293

1989mini1293

    Passed Test

  • Noobies
  • PipPip
  • 28 posts
  • Local Club: North somerset Mini Club

Posted 10 September 2009 - 09:33 PM

I have built my own r1 package Fwd.
any how i have put it all backtogether after first test.
Problem is when i connect the batter i had noticed b4 that i think the exup motor moved this is not happening.
also when i turn on the ignition on, the only thing is the neutral light rest of the clocks(yamaha clocks) are blank.
any one have any idead. iv been looking at it for 2 nights now.
everything seams to be connected!!
Getting close to castle combe now so realy need to get it going again.

Thanks

#2 mikeb 16v

mikeb 16v

    Learner Driver

  • Noobies
  • PipPip
  • 16 posts
  • Location: llanelli

Posted 11 September 2009 - 09:02 PM

i would check that youve got a good earth

#3 1989mini1293

1989mini1293

    Passed Test

  • Noobies
  • PipPip
  • 28 posts
  • Local Club: North somerset Mini Club

Posted 12 September 2009 - 08:35 PM

I have built my own r1 package Fwd.
any how i have put it all backtogether after first test.
Problem is when i connect the batter i had noticed b4 that i think the exup motor moved this is not happening.
also when i turn on the ignition on, the only thing is the neutral light rest of the clocks(yamaha clocks) are blank.
any one have any idead. iv been looking at it for 2 nights now.
everything seams to be connected!!
Getting close to castle combe now so realy need to get it going again.

Thanks

hopefuly im onto something. some one on a r1 forum put me in the right direcion of the earth for the clocks not every wher else i was looking.
think there is a break between where the earths join and go to one..




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Mini Spares