Jump to content


Photo

Steering Column Problem


  • Please log in to reply
31 replies to this topic

#31 Min E

Min E

    Mini Mad

  • Members
  • PipPipPipPip
  • 226 posts

Posted 03 November 2009 - 03:49 PM

Just to expand on my suggestion of a new section for product or practice/proceedure problems:

Maybe the new section could be set up in such a way that no individual member could actually 'post' directly to it. It would be purely for the admin team to select suitable threads, or content from threads, which they consider to be worthy of bringing to the attention of members and making it permanently and easily accessible rather than it being lost to the ether.

For example, I would doubt that anyone would want or indeed need to read all the way through this thread just to discover how to fit a drop bracket without endangering ones life but any of the admin team (who between them I assume read all the threads) could create a short 'article' for everyones benefit.

Already in this thread (post #18) there has been referrence to previous threads which indicate the possibility of substandard ball joints being available on the market and there must have been many other comments about things now long forgotten but still relevent.

Surely information such as that is serious enough to warrent its own heading.

Your thoughts please MOD's.

[EDIT] sorry Dan I was typing this up when you posted your comments.

Edited by MINY, 03 November 2009 - 05:22 PM.


#32 MRA

MRA

    Previously known as 'mra-minis.co.uk'.

  • Banned
  • PipPipPipPipPipPipPipPipPipPip
  • 7,607 posts
  • Location: Due to move again....

Posted 15 November 2009 - 10:53 PM

Agreed. We buy the brackets in loose, and then add our own instructions. It would be entirely down to any other specialists to supply with or without instructions. The bracket itself cannot create a fault, not being supplied with the correct information to fit it properly is where the issue lies



We like Mini Spares feel that we have a responsibility to our customers and have been including fitting instructions with our steering drop bracket for quite a while now.....

Regards Martin
MRA Minis




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users