Has anyone any expirience of fitting a boot pop solenoid to a smoothed off boot? I have seen kits that claim to be universal, but they are fairly expensive when compared to what you can buy a solenoid for on Ebay.
Would a door/boot pop or central locking solenoid do the job and what additional parts would be required to complete a job like this?
Boot pop
Started by
Snowfruit
, Nov 15 2005 04:05 PM
3 replies to this topic
#1
Posted 15 November 2005 - 04:05 PM
#2
Posted 15 November 2005 - 04:12 PM
i used a fiesta solenoid on my 106 when i had it.
i made it up as i went along butit worked fine. As long as you get the catch and all the bits in the right place it should be fine.
i made it up as i went along butit worked fine. As long as you get the catch and all the bits in the right place it should be fine.
#3
Posted 15 November 2005 - 05:41 PM
i reccon you could just use a solanoid and a switch. wired into the dash to pop the boot. then you got to wire it all and make the solinoid saty were you want to open it.
#4
Posted 15 November 2005 - 07:37 PM
yep thats what i did
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users