29 replies to this topic

[Ste mini]

what are they all found them in my mini

[Ste mini]

[miniboo]

could you get some bigger pics i can't see them! lol

[Sprocket]

Verto clutch slave cylinder bracket, A+ distributer clamp, Near side engine mount bracket, A+ clucth lever, Lower rad bracket

Oh and an oily stain on tarmac

Edited by Mini Sprocket, 28 November 2005 - 07:06 PM.

[The Matt]

...

[Ste mini]

am i missing any off the mounts to fit an enginebar the tie rod

[The Matt]

I appear to have been beaten to it again! DOH :nugget:

[Ste mini]

lol still need to know if im missing bits

[Sprocket]

Corrections applied

Isn't MS paint garbage

[Sprocket]

am i missing any off the mounts to fit an enginebar the tie rod

Not quite sure what your talking about

[Ste mini]

to mount an a series into my car am i missing a mount
or will my auto one fit

[The Matt]

I am guessing he means the steady bar that is fitted near the clutch cylinder??

If so, yes you are!

[The Matt]

If you are fitting a manual engine into a auto subframe the frames are slightly different.

I think you either need to swap the frames or use a spacer on the engine mounts??

[Ste mini]

http://www.bretts.co...ram/engsupp.jpg

these are the mounts but it looks like im missing stuff

[nomininolife]

Steady bar looks like this

Attached Files

•  steady_bar.jpg   4.05K   0 downloads