got one of these...
what are the two knobs at the top for (circled red) and the bottom one (blue)??
just going to be spraying cely grey primer with it.
what do you reakon on thinning? 50/50??
spray gun...
Started by
screech
, Jan 07 2006 10:25 PM
5 replies to this topic
#1
screech
-
- Members
-
- 3,136 posts
Up Into Fourth
- Location: West Sussex
- Local Club: Bognor rock ya mini & WSMOC
Posted 07 January 2006 - 10:25 PM
#2
Pooky
-
- TMF+ Member
-
- 5,691 posts
Crazy About Mini's
- Location: Sunny Sussex
Posted 07 January 2006 - 10:37 PM
a pic or something might help! :tongue:
#3
screech
-
- Members
-
- 3,136 posts
Up Into Fourth
- Location: West Sussex
- Local Club: Bognor rock ya mini & WSMOC
Posted 07 January 2006 - 11:00 PM
#4
screech
-
- Members
-
- 3,136 posts
Up Into Fourth
- Location: West Sussex
- Local Club: Bognor rock ya mini & WSMOC
Posted 08 January 2006 - 10:16 PM
anyone?????
#5
ian
-
- Members
-
- 676 posts
Super Mini Mad
Posted 09 January 2006 - 08:08 AM
i think 1 will be spray pattern and other will be air flow (amount of air going through), im sure someone will say if im wrong. lol
when ive mixed paint, put something in it, then pull it out when it stops running off, count the drips, ie 3 or 4 drips should be about right
when ive mixed paint, put something in it, then pull it out when it stops running off, count the drips, ie 3 or 4 drips should be about right
#6
jack_marshall
-
- Members
-
- 2,540 posts
Up Into Fourth
Posted 09 January 2006 - 04:23 PM
One is pressure and the other is the width of the spray (if you get me?)
For priming you want the width to be quite short and over lap the edges as you go...
Hard to explain. Lol. You probably already know!
For priming you want the width to be quite short and over lap the edges as you go...
Hard to explain. Lol. You probably already know!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
