I'm wanting to remove the front badge from my mini and have the holes filled and the bonnet resprayed.
I want to do the filling myself. Is there a particular type of filler I need to do this? and are there any other things I should do before/after.
Thanks
Debadging
Started by
Jomo
, Feb 14 2006 02:43 PM
1 reply to this topic
#1
Posted 14 February 2006 - 02:43 PM
#2
Posted 14 February 2006 - 11:47 PM
Dont just skim over the holes.
1. It will be hard to get the filler in just the holes and not surrounding area's
2. It will drop out pretty quickly/ and / or raise and bubble from heat in the engine bay.
Get a tack of weld over each of the holes from the back, then skim them.
1. It will be hard to get the filler in just the holes and not surrounding area's
2. It will drop out pretty quickly/ and / or raise and bubble from heat in the engine bay.
Get a tack of weld over each of the holes from the back, then skim them.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users