Jump to content

- - - - -

Cutting My Shell?

  • Please log in to reply
3 replies to this topic

#1 minithekid


    Mini Mad

  • Noobies
  • PipPipPipPip
  • 113 posts
  • Location: stanley
  • Local Club: none

Posted 30 November 2012 - 04:31 PM

i am ready to cut out the rear of my shell for my z cars k20 frame. does anyone have pictures or know of any info. thanks

Edited by minithekid, 30 November 2012 - 04:33 PM.

#2 brum,brum,mike


    Super Mini Mad

  • Noobies
  • PipPipPipPipPipPip
  • 551 posts
  • Location: Gloucestershire
  • Local Club: Mini Rebels

Posted 30 November 2012 - 07:00 PM

Theres a how to in the builder dvd...
Im not sure if you need to cut to the same dimentions on the new kits, but tells you what you need and how to do it.


#3 ZCars Steve

ZCars Steve

    Z Cars

  • Traders
  • PipPipPipPip
  • 141 posts
  • Location: East Yorkshire

Posted 06 December 2012 - 10:24 AM

Have a look at this :proud:

https://www.dropbox....g the Shell.wmv

#4 benmoffat


    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 347 posts

Posted 27 December 2012 - 08:23 PM

There's all the info you need on the DVD if you have it. Or there were instructions on the website. And on people's builds here. Best thing I could say it just cut very long, and then trim back. If you have your kit cut the bulk out of the floor so you can get the back of the kit in, then just keep trimming till you get to the right measurement from the crossmember. (can't remember what this is exactly but its about 600mm I think) Doesnt really matter if it's a bit too long, but you can never add any more material on afterwards!

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Mini Spares