Just Another Pick Up
Started by
Rosslin Racing
, Feb 24 2013 10:44 AM
106 replies to this topic
#31
Posted 27 February 2013 - 08:20 PM
I do have trouble with photobucket. grrrr.
#32
Posted 27 February 2013 - 08:21 PM
shifty which photo?
Edited by Rosslin Racing, 27 February 2013 - 08:22 PM.
#33
Posted 27 February 2013 - 08:23 PM
I use facebook now, up load the pics there and then copy onto here, dead easy!!
#34
Posted 27 February 2013 - 08:23 PM
This one!!
#35
Posted 27 February 2013 - 08:24 PM
shifty which photo?
On page one before you started cutting, the floor return should be the other side of the heel board
#36
Posted 27 February 2013 - 08:24 PM
yes see what you mean that the replaced panel as well!!
#37
Posted 27 February 2013 - 08:49 PM
#38
Posted 01 March 2013 - 10:58 AM
Day6
Welded the floor exstention to the heel board. set up to fit the load floor to the main floor starting to look good.
Welded the floor exstention to the heel board. set up to fit the load floor to the main floor starting to look good.
#39
Posted 01 March 2013 - 05:39 PM
found a problem with the hinges there is about 6mm diffrence in hieght on the new hinges
The left hand hinge is how it should be and how it was when I took it to bits.
The rh hinge is how it wants to fit on the car
The left hand hinge is how it should be and how it was when I took it to bits.
The rh hinge is how it wants to fit on the car
#40
Posted 01 March 2013 - 10:34 PM
quality work!
cant really say good luck, you dont need it! ;)
cant really say good luck, you dont need it! ;)
#41
Posted 01 March 2013 - 10:44 PM
thank you. try my best
#42
Posted 02 March 2013 - 07:12 AM
Thank you for those photos, they went right into my pup archive :)
Chris
Chris
#43
Posted 02 March 2013 - 05:54 PM
the photos are all done on a Samsung S3 better than my digital
#44
Posted 05 March 2013 - 11:15 AM
its the Flying pick up
#45
Posted 05 March 2013 - 11:57 AM
What's it doing all the way up there. Surely it make's it more difficult to work on!!!!!!!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users