20 replies to this topic

[minilee94]

What dashboard set ups can I use with a weber box
But I want to keep my rev counter wich is 100mm
A Center speedo clock and 2 small gauges doesn't have to be in the Center

This is the set up I have now

Edited by minilee94, 20 March 2013 - 08:02 PM.

[creakyjaws5533]

What weber is it?

[minilee94]

45dcoe

[Jordie]

What about the above? we will be selling these in the near future. can be made to look retro or modern depending on how you work it. Below are some pictures of the item from the 60s and some documentation for it.

 motolux dash alexander speedwell period 60s.JPG   48.24K   30 downloads
 4.JPG   43.31K   27 downloads
 5.JPG   63.78K   9 downloads

[minilee94]

Do I need a top dash rail fitted ??

And when u say near future when??

And how much thanks

[Jordie]

You remove your top dash rail.

You keep your existing bottom rail.

Moulds need to be produced and tested. We are making improvements to the dash by improving the fit and the area around the demister vent. Few weeks id say.

Estimated price is £75 inc next day courier delivery.

Jordie

[creakyjaws5533]

I think you will need to move the centre speedo (not 100% sure) I've got a 28/36 no mods quite a few people have done them I'm sure there will be thread on here

[mingy]

What dashboard set ups can I use with a weber box
But I want to keep my rev counter wich is 100mm
A Center speedo clock and 2 small gauges doesn't have to be in the Center

This is the set up I have now

I have got an Autoplas dash which allows for the speedo to be in the normal position and enough blank space to the right of the speedo for a 100mm tacho and three 52mm gauges and some switches. To the left of the speedo is an open glove / storage inset and again some room for auxilliary switches.

[minilee94]

Yeah it all needs moving over so everything is on the right hand side of the heater pull switch

And okay il have a think as I may just have to move all my clocks over

[minilee94]

Mingy - sorry but I really dislike auto plas dashes lol sorry wont be for me

[creakyjaws5533]

Might help http://www.theminifo..._+weber +45dcoe

[minilee94]

Hmm not a massive help but good to look back on it for some info wen I fit the box

Thanks

[creakyjaws5533]

Sorry cant find much else :/

[mingy]

Mingy - sorry but I really dislike auto plas dashes lol sorry wont be for me

No problem, i must agree mine is a bit flimsy but it was on the mini when i got it which had been rally prepared 20 years ago so i want to keep it original.

[minilee94]

It's okay mate thanks anyway

And yeah fair enough keeping it original