2 replies to this topic

[marsy]

Hi, where can I attach my back box to?

Have no rear subframe, so have not got that to attach the brackets to?

Any ideas where or how I can fit it?

Anyone done it before with no rear subframe? 

Thanks 

[marsy]

What I've done is use a rear subframe front rubber mount (minispares C-19G3257), drill 2 holes in the boot floor then make a bracket that fit's from that to the exhaust.....

 

Sounds like a good shout, what about the other end other end of back box near the tail pipe? Cheers

[Dan]

  The tail pipe end is what you are hanging from the floor.  The forward end is suspended from the beam as it would be from a subframe.