Hi cartneil! Wouldn't have a clue about 0-60 but she spins the tubes no bother lol! It's quick for a mini lively and just wants to be revved! I have a 3.4 ratio!
Specialist Components Mpi Throttle Body Kit
Started by
Minimad100
, Aug 07 2013 10:35 AM
68 replies to this topic
#61
cian
-
- Traders
-
- 869 posts
One Carb Or Two?
- Location: northern ireland
- Local Club: Minis In Northern Ireland
Posted 04 September 2016 - 03:21 PM
#62
cartneil
-
- Noobies
-
- 46 posts
On The Road
- Location: Leicestershire
Posted 06 September 2016 - 08:57 PM
Thanks for replying so long after the original post!! I was thinking of going 3.2 ratio to compromise for longer drives, as long as it can still get going when I put my foot down (as you know standard mpi is pretty pants!), I'm looking forward to getting the engine rebuilt with the same set up as yours :)
#63
cian
-
- Traders
-
- 869 posts
One Carb Or Two?
- Location: northern ireland
- Local Club: Minis In Northern Ireland
Posted 07 September 2016 - 05:21 AM
A 3.2 prob will be pretty similar I'd say! Get pics up of the build man! It's really worth the money!
#64
cartneil
-
- Noobies
-
- 46 posts
On The Road
- Location: Leicestershire
Posted 07 September 2016 - 08:51 PM
Yeah will add some rebuild pics, though I don't have many of the state before it was welded up and painted!! Will sort the other pics out and get them on. Engine ready to come out and get sent for boring out to 1330 :)
#65
mpialan
-
- Noobies
-
- 100 posts
Mini Mad
- Location: Macclesfield
Posted 25 February 2018 - 03:08 PM
Does anyone with a Specialist Components MPI Injection Kit fitted have a photograph of the correct way to connect the Breather Hoses on the system.
Many thanks in advance.
#66
brivinci
-
- Members
-
- 1,102 posts
One Carb Or Two?
- Location: New Jersey
Posted 26 February 2018 - 09:52 PM
Would be awesome to see some pix of this setup. Sounds very impressive.
#67
toplessmini
-
- TMF+ Member
-
- 486 posts
Speeding Along Now
- Location: Isle of Wight
- Local Club: none on the island....
Posted 08 April 2019 - 05:27 PM
Has anyone done a build thread for fitting one of these?
I've had a new one for years just sat in the box.
Needs fitting......
#68
Steve220
-
- Members
-
- 4,885 posts
Up Into Fourth
- Location: Shropshire
- Local Club: RAF Mini Club
Posted 10 April 2019 - 07:46 AM
Their instruction online are a little old, however they do cover installation. Your biggest issue will be a good base map then getting it mapped and set up.
#69
Midas Mk1
-
- TMF+ Member
-
- 5,641 posts
Crazy About Mini's
- Location: Manchester
- Local Club: S.U.N.M.C
Posted 10 April 2019 - 08:08 AM
Installation wise I scoured their fb page for detailed engine bay pics and worked from there, if your doing it on an MPi its relatively straight forward as removing the original MPi loom you learn where the wires go etc.
As Steve though, mine wouldnt run on their map they sent across which apparently for nearly the same spec, the base map for the 296 cam'd Mini they have ran better, got me to the dyno (essential)
Edited by Midas Mk1, 10 April 2019 - 08:08 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
