18 replies to this topic

[benpopham]

Hey

Im stripping an auto to build my track car. Now no comments about how 'its too good to strip blah blah blah'

 

Everything needs to go, all the bolt on panels, engine, interior, loom, etc.

 

Its in brilliant condition and always garaged, done 30k and the engine runs very well. Can be driven before its removed if anyone wants the engine. Everything works.

 

Most needs to be collected from Southampton but I can post some pieces.

 

PM me if there is anything you need.

 

Ben

 

 

 

 

 

 

[Ben_O]

Im gonna say it anyway, what a waste     

[benpopham]

How is it a waste? Its going to be a turned into a concours spec car that is worth 10 times its current value.

 

Left how it is someone would have left it to rust and patched the hell out of it, and be worth nothing in a few years. This way it will live on for 20 more years, and be enjoyed to its full potential.

 

Waste? .. I don't think so.

[Ben_O]

Ha ha, i'm only mucking about.

 

What's the spec going to be? will there be a build thread for it?

[benpopham]

I have a Swiftune 1380 on a weber 45, Mondo sport and KAD everything. Carbon doors, front, bootlid etc. Spectrum split rims.

 

http://www.carbonwee.../bens_mini.html

 

There will be a build thread, Im making a webpage to do it on :)

[gills85]

I'd be interested in the wiring loom.

[olly33]

How much posted for the rear c pillars cream vinyl,where the seat belt bolts through and the lower vinyl just below rear screen, if all in good condition. Also the black gutter trim.
I also Need,the fresh air angle pipe that bolts in drivers wheel arch and adjoining large flex hose that goes towards front of car.Cheers

Edited by olly33, 31 October 2014 - 07:10 PM.

[Ben_O]

I know someone who will probably have the wheels and trims off of it

[CityEPete]

I know someone who will probably have the wheels and trims off of it

I'm good for wheels but I'd like the hub caps and clips please :)

[benpopham]

How much posted for the rear c pillars cream vinyl,where the seat belt bolts through and the lower vinyl just below rear screen, if all in good condition. Also the black gutter trim.
I also Need,the fresh air angle pipe that bolts in drivers wheel arch and adjoining large flex hose that goes towards front of car.Cheers

 

Hey,

The c pillar covers are grey, not cream. The black gutter trim would be tricky to post as it doesn't roll up, so would be the size of a roof!

 

I could do the fresh air pipe and inner wing plastic piece. Would you need them posting?

 

 

 

I know someone who will probably have the wheels and trims off of it

I'm good for wheels but I'd like the hub caps and clips please :)

 

 

 

There is only 3 hub caps? would you still like them?

[olly33]

Hi,I will check mine to make sure not grey. Forget the roof trim then, yeah would need all posting bit far for me, im in the midlands.

[olly33]

Mine cream. Defo. How much posted for the 2 parts.

[mini-auto]

Hi, I might be interested in the engine & box along with front sub frame & driveshafts/hubs etc as a unit but the price would need to be right as I'm in North Yorkshire & to collect would be approx a 600 mile trip & 6 hrs each way.

 

To change out the lot as a unit might be a quick way for me to get my auto mini back on the road where it belongs & would allow me to rebuild my broken gearbox at my leisure.

 

I've read that the autobox usually fails at around 30k miles so maybe this is a daft idea & its too far to travel but

if the price is right ....

[chuffed]

Is the windscreen going? I may also need other bits i just cant think of them right now!

[CityEPete]

How much posted for the rear c pillars cream vinyl,where the seat belt bolts through and the lower vinyl just below rear screen, if all in good condition. Also the black gutter trim.
I also Need,the fresh air angle pipe that bolts in drivers wheel arch and adjoining large flex hose that goes towards front of car.Cheers

 
Hey,
The c pillar covers are grey, not cream. The black gutter trim would be tricky to post as it doesn't roll up, so would be the size of a roof!
 
I could do the fresh air pipe and inner wing plastic piece. Would you need them posting?
 
 

I know someone who will probably have the wheels and trims off of it

I'm good for wheels but I'd like the hub caps and clips please :)

 
 
There is only 3 hub caps? would you still like them?

I've probably got enough spare caps now so I'll let someone else have a chance if they need some but I'd like all the clips though if you can pm me a price including postage for them. Ta