Jump to content


Photo
- - - - -

Austin Mini 1981 Hl


  • Please log in to reply
43 replies to this topic

#31 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 15 March 2016 - 05:13 PM

More stuff done today, as the weather is getting slightly better I've been doing some prep and painting, hoping to get the shell painted at the start of summer.

Bulkhead and dash rails inside primed. Been putting this job of for a while.
image_zpsmpugfryx.jpeg
image_zpsqkd4x74q.jpeg

Stone chipped after except dash rails, plus did the floor pans.
image_zpsnrdejctk.jpeg
image_zpsodgy6pob.jpeg
image_zpsmybyebe2.jpeg
image_zpsatn6jauu.jpeg

A few brackets and new rear drums etched and painted.
image_zps3v9bz7g7.jpeg
image_zpsivny3x1i.jpeg

#32 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 19 March 2016 - 07:40 PM

Painted dash rails, a pillars and crossmember, going to brush paint internal floor black once bodywork and paint complete.
Not perfect but had enough need it done.
image_zpsouphusdv.jpeg
image_zpsmvlazule.jpeg
image_zpsh30j8inx.jpeg
image_zpsh3ua8osz.jpeg
image_zpsb1u00lne.jpeg

#33 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 20 March 2016 - 07:32 PM

Boot lid prepped
image_zpszfnn60db.jpeg
Etch primed
image_zpsfxqfd4yt.jpeg
image_zpszf3wj2hx.jpeg
Primed again with standard primer ready for wet flatting.
image_zps3p0vutgt.jpeg
image_zpsipssytrw.jpeg

#34 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 23 March 2016 - 07:51 PM

Few coats of paint to bootlid, going to flat it off in a few days and give it a couple more coats.

image_zpswy3qgsl6.jpegimage_zpsobvehu5b.jpeg

#35 andrewmini67

andrewmini67

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 144 posts
  • Location: Bristol
  • Local Club: West Country minis

Posted 23 March 2016 - 08:11 PM

You're getting there, well done.....  :proud:



#36 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 30 March 2016 - 02:51 PM

Flatted last coats of paint and applied 2 more coats, flatted this with 1500 and polished up.
Not perfect but got to keep telling myself this was never intended to be a show car.

Not flatted number plate recess as will be covered by plate.

image_zpsdwcw4l2e.jpeg

image_zpsxibymjiz.jpeg

#37 blueovalcraig

blueovalcraig

    Mini Mad

  • Members
  • PipPipPipPip
  • 193 posts
  • Location: Rothesay, Isle of Bute

Posted 30 March 2016 - 11:03 PM

Looking great

#38 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 31 March 2016 - 04:35 PM

Painted rear subframe in black enamel, may flat and give a few more coats.
image_zpsmolb0agn.jpeg
image_zpsudzfz196.jpeg
image_zps5hsnmj5y.jpeg

#39 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 07 April 2016 - 04:12 PM

Drivers side back to bare metal and prepped, still needs slight work but 90 percent there.
image_zpspujygkqk.jpeg
Etch primed.image_zpsvcz2gudt.jpeg

#40 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 10 April 2016 - 02:16 PM

Drivers door prepped, still needs slight filler work at top but will work around the whole car again after I've got it all somewhere near.
image_zps3rmgmnb8.jpeg
Drivers side door etch primed.
image_zpsfho9xjfm.jpeg
Passenger inner door frame back to metal and etch primed, ready for outer skin.image_zpsws2gescs.jpeg
A few random pics of prep so far.
image_zpskg78ap90.jpeg
image_zps8ugjp8mt.jpeg

Edited by cookie4343, 10 April 2016 - 02:18 PM.


#41 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 22 April 2016 - 07:41 PM

Abit of painting, doing this in sections for the first couple of coats then going to flat it all off and give the whole car a couple of last coats.
Wherever I put paint I'm happy with prep and so on.
image_zps2nhpmvjl.jpeg
image_zpsa1zep9k8.jpeg

#42 lawrie124

lawrie124

    Camshaft & Stage Two Head

  • TMF+ Member
  • PipPipPipPipPipPipPipPip
  • 1,709 posts
  • Location: Reading

Posted 03 April 2017 - 03:42 AM

I am very interested in this Ral7000.

Do you have any daylight pictures?

Cheers. Mike.

#43 cookie4343

cookie4343

    **Caution: Do Not Feed Alcohol**

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,257 posts
  • Local Club: CV1 Mini's

Posted 03 April 2017 - 08:10 PM

I'll try get you some in the next few days.

#44 lawrie124

lawrie124

    Camshaft & Stage Two Head

  • TMF+ Member
  • PipPipPipPipPipPipPipPip
  • 1,709 posts
  • Location: Reading

Posted 05 April 2017 - 04:32 AM

I'll try get you some in the next few days.


Thank you.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users