33 replies to this topic

[josh.goddard]

Well as promised I've been back up the unit for a couple of hours, carried on stripping a few bits off, I got bored of that and decided I'd strip some underseal, and get the poking stick out 😂😂 next job is to go back up with the welder and grinder now and start with getting some new metal in it. Looking like that will be next weekend as the Mrs is on nights Saturday and Sunday so I've slipped my lead 👍🏼.



















Tune in soon for the tin bashing and welding to commence.

Josh

[josh.goddard]

Been up the unit today, And I've started cutting rust out and welding in metal, ran out of etching primer so need to tidy up the door post repair and seal/paint it before doing the inner and outer sill repairs.













Josh

[josh.goddard]

Had a couple of hours at the van this week, and will get some more time over the weekend on it, ive managed to get the inner sill on the drivers side done ready to start the floor:

 

 

 

 

not had a deal of time on the van recently because ive been building a roll over spit to do my mini van on:

 

 

 

[/URL]

 

Josh

 

Edited by josh.goddard, 09 June 2017 - 08:27 AM.

[josh.goddard]

Managed to squeeze an hour in on the van so a little bit of progress, hopefully bit more to come over the weekend. Got the drivers side floor pan rot cut out and patch nearly shaped up, need to go and get a bottle of welding gas Mind before I go back up the unit.









Josh