#1
Posted 15 February 2015 - 07:06 PM
#2
Posted 15 February 2015 - 07:11 PM
Most if not all pattern panels will be magnum supplied but sold through various companies. M Machine do make a lot of their own panels, sills outer and inner, floors etc but not outer panels like wings and quarter panels. But again with M machine its always best to call them to see exactly what they do and don't manufacture.
#3
Posted 15 February 2015 - 07:29 PM
Full pattern panels are not too bad and only require minor tweaking.
What you need to watch for is pattern "repair" panels which were designed to be the rough shape and are expected to be welded over the top of the existing rusty section.
This is true of bootfloor repair panels (back section and sides) hinge panel repairs, door steps etc etc
Ben
#4
Posted 16 February 2015 - 11:49 AM
Also tagged with one or more of these keywords: rust repair
Mini Technical Sections →
Bodywork, Paint and Detailing →
Where To Start - Rear EndStarted by OzKopite , 03 Mar 2024 rust repair |
|
|
||
Mini Technical Sections →
Bodywork, Paint and Detailing →
Mini Specialist For Welding -South East/south WestStarted by s2ulk , 20 Oct 2023 rust repair |
|
|
||
Mini Technical Sections →
Bodywork, Paint and Detailing →
Wheel Arch/boot Floor Repair HelpStarted by austinmayfair85 , 10 Aug 2023 rust repair |
|
|
||
Mini Technical Sections →
Bodywork, Paint and Detailing →
A Panel BubblingStarted by Jezzer , 12 Jun 2023 rust repair |
|
|
||
Mini Technical Sections →
Bodywork, Paint and Detailing →
Looking For A Welder Near InvernessStarted by keithi , 10 Apr 2023 rust repair |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users