Flock It
Flocking is like no other finish; it can best be described as a velvet-like surface and can be applied to any solid surface, metals, wood, plastic, textiles, fabrics, glass, etc. with a minimum of preparation. Glove boxes, tool trays, fascias etc. Paint on the adhesive and puff the flock onto the adhesive. After drying, brush off the excess to give that original finishing touch. Today's modern flock is made from hard wearing, long lasting nylon and gives a very professional finish.
Prepare It
The surface to be treated must be free from grease or oil. Fill any gaps or holes using a filler or sealant. Arrange a sheet of paper or polythene around the area to be treated, this is to catch and recover any loose flock for re-use.
Apply It
Simply paint the special coloured adhesive liberally over the whole of the surface to be treated. Make sure that no parts are missed. It is better to over apply than to miss any area.
Flock It
Before the adhesive can dry, squeeze the special applicator bottle approximately 20mm away from the surface. Remember the quicker the flock arrives at the surface the more likely the it is to stick to the adhesive. Again it is better to over apply than miss any area. Leave to dry for 24 hours to allow the adhesive to set.
To purchase visit the link below;
Edited by Frost Auto, 30 March 2015 - 11:15 AM.