139 replies to this topic

[robminibcy]

1. Sam
 2. Matt
 3. Jon
 4.George
 5. Matt
 6. Big Sam (price dependant)
 7.blakie
 8. TfcIan
 9. Richie83 (price dependent)
 10. Panch1989 (price dependent
 11. DEXISWOLF (pprice dependent)

12. Robminibcy (price dependant)

[ministacey]

Interested depending on the price! If it's the same price as last year I'm in.

[Italianjob]

What was the price last year? Was admiring the 10" wheels at L2B.. If it's a good price I might also be interested!

[alex-95]

Ok, I’ll keep this offer open until the end of April, if we hit numbers before then I’ll PM everyone on the list to proceed with their kit earlier if they wish. Prices include VAT, but not delivery which to std UK mainland will be £8.70. Alternatively they can be collected from either Potters Bar or North stores ONLY!

20 Mixed kits to get the discount

Full kit with AP calipers C-AJJ4028 £480.00
Full Kit with Minispares calipers C-AJJ4028MS £375.00

8.4" to 7.5" conversion with AP calipers £275.00
8.4" to 7.5" conversion with Minispares calipers£165.00

 

 

What was the price last year? Was admiring the 10" wheels at L2B.. If it's a good price I might also be interested!

last years above

Edited by alex-95, 19 May 2015 - 08:27 PM.

[Toeknee]

Ooh, great idea. Pop my name down on the list, please :)

[timmy850]

I'm interested, pending shipping and price

[Italianjob]

Call me stupid if you must but, what kit should i be looking at here? got 12" at the mo, does it require the full kit or could i get away with the cheaper options? As my bearings/cv joints/calipers etc have been done not so long ago so id only keep them for spares.

[Alex_B]

Call me stupid if you must but, what kit should i be looking at here? got 12" at the mo, does it require the full kit or could i get away with the cheaper options? As my bearings/cv joints/calipers etc have been done not so long ago so id only keep them for spares.

You will only need the 8.4" to 7.5" kit, the more expensive one is for drums to disks. 

Also interested price dependant. 

[moolieferret]

1. Sam
 2. Matt
 3. Jon
 4.George
 5. Matt
 6. Big Sam (price dependant)
 7.blakie
 8. TfcIan
 9. Richie83 (price dependent)
 10. Panch1989 (price dependent
 11. DEXISWOLF (pprice dependent)

12. Robminibcy (price dependant)

13 moolieferret

[screech]

Interested, again depends on price... what about with alloy callipers..? 

[Retrominisprint]

ADD ME PLEASE.... Bought these 7.5s last year, but sold that mini :'( haha!

[Retrominisprint]

1. Sam
 2. Matt
 3. Jon
 4.George
 5. Matt
 6. Big Sam (price dependant)
 7.blakie
 8. TfcIan
 9. Richie83 (price dependent)
 10. Panch1989 (price dependent
 11. DEXISWOLF (pprice dependent)

12. Robminibcy (price dependant)

13 moolieferret

14. Retrominisprint

[Sam]

I'm hoping Simon will confirm the prices in the next few days, but so far it looks like we have sufficient interest to warrant a group buy! 

[Italianjob]

1. Sam
 2. Matt
 3. Jon
 4.George
 5. Matt
 6. Big Sam (price dependant)
 7.blakie
 8. TfcIan
 9. Richie83 (price dependent)
 10. Panch1989 (price dependent
 11. DEXISWOLF (pprice dependent)

12. Robminibcy (price dependant)

13 moolieferret

14. Retrominisprint

15.Italianjob(price dependant)

[PaulColeman]

My daughter has a 1976 Mini 1000 with original drum brakes and original standard wheels. If this kit would fit her car then I'm sure she'd be interested. Does it include the servo and master cylinder? What sort of mods are needed? As you can tell I know nothing about this conversion!

 

Paul.