Jump to content


Photo
- - - - -

C20Xe Mayfair


  • Please log in to reply
10 replies to this topic

#1 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 19 April 2016 - 11:06 PM

so i thought its about time to put up some photos of my build, now ive enjoyed driving it a bit, i'd like to say i'm done but it'll never be finished and i'm already planning the next phase of the project, but for now 

here's a list of whats been done so far and some photos.

 

its a 1985 mini mayfair

 

Engine

C20xe on zx9-r bike carbs danst engineering manifold 

nodiz ignition management 

omega forged pistons and rods 

f20 gearbox 

 

body/chassis

 

Amt front subframe 

abs 90mm extended fibreglass front 

resprayed in old english white and black 

mexico arches 

6 point fabricage rollcage 

gaz front coilovers

redspot cones hilos on the rear 

kad rear anti roll bar

13x7 superlight softlines

custom stainless exhaust 

tarox 6 pot front brakes

minifin rear brakes 

 

interior

 

monaco pro bucket seat 

sabelt four point harnesses 

carbon fibre door cards 

race fuel tank 

flocked fibreglass dash 

etb digidash 

snap off momo steering wheel 

 

002.jpg

 

008.jpg

 

016.jpg

 

042.jpg

 

053.jpg

 

055.jpg

 

057.jpg

 

071.jpg

 

072.jpg

 

080.jpg

 

081.jpg

 

113.jpg

 

120.jpg

 

125.jpg

 

128.jpg

 

132.jpg

 

135.jpg

 

136.jpg

 

182.jpg

 

185.jpg

 

183.jpg

 

192.jpg

 

204.jpg

 

217.jpg

 

218.jpg

 

220.jpg

 

247.jpg

 

250.png

 

 

and my future plans include

adding alot more carbon fibre

some split rims 

a limited slip diff 

and refining the car for the track 

when funds allow of course

 

 

 



#2 Scotauto

Scotauto

    Speeding Along Now

  • Traders
  • PipPipPipPipPip
  • 335 posts
  • Location: Denmark

Posted 17 October 2016 - 06:27 PM

Hi Andy

When you mot'ed your mini did the engine details get changed on the registration documents? I'm asking because I need a copy of some sort of documents to get a mini tested in Denmark with the same engine because it is not a standard modification. Any help would be greatly appreciated..:-)

 

Jason



#3 gxg_romford

gxg_romford

    Learner Driver

  • Noobies
  • PipPip
  • 24 posts
  • Location: romford, essex

Posted 31 October 2016 - 10:53 AM

Hey, I cant see the pics unfortunately, however the build seems very similar to one I have just purchased. Just wondering which radiator you have used?

 

Thank you



#4 jase12377

jase12377

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 87 posts
  • Location: Castle bromwich

Posted 14 December 2016 - 05:42 PM

The feont being extended by 90mm doesnt look much diff to standard or do i not notice

#5 jase12377

jase12377

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 87 posts
  • Location: Castle bromwich

Posted 14 December 2016 - 06:19 PM

The feont being extended by 90mm doesnt look much diff to standard or do i not notice

#6 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 06 April 2017 - 09:14 PM

only just sorted out new laptop so no updates. the extended front is only really noticeable when parked next to a standard mini 



#7 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 06 April 2017 - 09:16 PM

some updated photos of it. now on throttle bodies and made 214bhp 178ftlbs on the rolling road 

F350A402-5C8A-4BD9-A4EC-B598819C182C.jpg

 

36EDEBFC-932F-4619-8F4A-4871BBF0802A.jpg

 

29365BF6-08DC-4060-8E43-14484553AC0B.jpg

 

429492DB-C35A-4C2B-BD6F-FD9C39A111F2.jpg

54C2BBA5-8125-41C4-96F6-93810B8D0284.jpg

 

8ACF6166-C2AF-484E-A980-CB410601F34C.jpg



#8 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 06 April 2017 - 09:18 PM

C453C465-0F26-4E2E-A803-BBBF5DB254A2.jpg

 

79B6AFA6-87EA-4A25-9F84-906CD0A39FAB.jpg



#9 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 06 April 2017 - 09:25 PM

an the latest bits/ upgrades, I've been trying to tidy some bits up I wasn't happy with and sort my brakes out so have opted for a wilwood pedal box and hydraulic clutch slave conversion hopefully have it finished at the weekend ready to enjoy it agains 

 

BE1BAE95-8D72-4348-BE17-8FDDE80B2C8D.jpg

 

E7F93C34-06BC-4600-9DB9-C02161D6BA6C.jpg

 

F3F4D85F-F4FF-419A-B692-B060ACB04995.jpg

 

F0A3561F-C927-4460-BA87-174D8BA27E1F.jpg



#10 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 14 June 2017 - 09:42 PM

so been plodding along with this when time allows I decided I wasn't happy with the interior so. have redone the dash and wired up the steering wheel controls. plumbed in the fire extinguisher and tidied up a few bits. and finally made a decision on a new set of wheels. I've gone for the specialist components 13 x 7 split rims in their classic style like the photo but with a different colour centre. can't wait for them to turn up now. I'll be sure to post photos once they're on the car 

IMG_1936.jpg

E8AC41DC-5DAC-4C5E-8C7B-735680F72D98.jpg

IMG_1927.jpg

60AADD2F-BA08-43F1-B024-258F614A5E46.jpg

7FE03735-2DE7-4F23-9668-9D02223CFC3D.png



#11 andy86

andy86

    Passed Test

  • Noobies
  • PipPip
  • 32 posts
  • Location: Cardiff
  • Local Club: Cymru minis

Posted 29 June 2017 - 08:27 PM

new wheels turned up today the look awesome can't wait to get them fitted. may need a small spacer on the front as clearance of the callipers is a little tight 

57B3AA68-A122-4BE6-A5AC-F0A4BA080129.jpg

65368229-5A7E-4234-9B49-7C8338D02490.jpg

046A8C5D-AE00-4683-845B-1E272B6E8F4B.jpg






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Mini Spares