Very please to read here that it seems you guys got it sorted and MOTed.
So, what was the issue with the front brakes that gave no pedal prior to MOT?
Copy that on the rears following MOT.
Upgrade To Twin Leading Shoe And Now No Pedal
Started by
adam_93rio
, May 30 2016 07:27 PM
61 replies to this topic
#61
Spider
-
- Admin
-
- 13,929 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 06 August 2016 - 07:28 PM
#62
adam_93rio
-
- Members
-
- 3,271 posts
Up Into Fourth
Posted 08 August 2016 - 10:40 PM
It's still got a very low pedal, which on the second press will get higher up. But they do stop the car, so they passed the braking efficiency test. It's still not going to be used until the problem is properly sorted.
When I say that both front adjusters were turned toward the front of the car, that's just how I saw it the easiest way to describe it. They've all been turn in the direction that the wheels move (when going forward)
When the rear brake parts show up I will see if that makes a difference, then try the adjusters as described in the last page. I've seen how they work, and the direction I was turning it does make sense
When I say that both front adjusters were turned toward the front of the car, that's just how I saw it the easiest way to describe it. They've all been turn in the direction that the wheels move (when going forward)
When the rear brake parts show up I will see if that makes a difference, then try the adjusters as described in the last page. I've seen how they work, and the direction I was turning it does make sense
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
