13 replies to this topic

[oliver122]

just wondering if anybody has got one yet an what are there thoughts on it ? looks like its a nice kit 

[superteddyeddy]

I got a weber on my supercharger runing a manifold. Looking into the new type with out a manifold defo will be better but not sure if the weber outlets going to be blocked off a bit as weber bigger then supercharger inlet

[minicooperr]

Do the podifold blow through systems still available as they looked the nuts

[timmy850]

I find the Vmax website is a bit hard to find anything and the pictures are so tiny. It would be nice to see how it fits in the engine bay 

 

 

[oliver122]

ive seen him post a few pics and even a vid on instagram , and also post a larger photo in a facebook group , just haven't read of anyone fitting one yet 

[jackuig]

I've ordered one, should be here this week and will be making a thread with everything I've done to my clubman. Just haven't had the time to make one yet!

[chris27989]

Personally I would go down the podifold route as the eaton m45 supercharger isn't designed to suck fuel through resulting in petrol stripping the Teflon coating from the vanes inside the supercharger. Jon the owner, founder and genius that devloped the podifold manifold is a member on here and is on Instagram too. Look up HubbaHubba's thread on his supercharger build worth a read..

Chris

[oliver122]

I've ordered one, should be here this week and will be making a thread with everything I've done to my clubman. Just haven't had the time to make one yet!

  
Ahhh will have to let me know how you get on with the kit mate

Personally I would go down the podifold route as the eaton m45 supercharger isn't designed to suck fuel through resulting in petrol stripping the Teflon coating from the vanes inside the supercharger. Jon the owner, founder and genius that devloped the podifold manifold is a member on here and is on Instagram too. Look up HubbaHubba's thread on his supercharger build worth a read..
Chris

I have read about the coat on the vanes stripping , i did look at the podifold kit but not long ago i brought a new master cyclinder and servo and with the podifold you carnt run a servo also do you have a link i carnt seem to find it

Edited by oliver122, 14 July 2016 - 06:32 PM.

[chris27989]

http://www.podifold.com
http://www.theminifo...62819-podifold/
https://www.instagram.com/podifold/

Some good info on there

[chris27989]

And here is HubbaHubba's thread.
He converted from suck to blow through so someone who know both sides of the supercharger argument
http://www.theminifo...-the-first-one/

[oliver122]

http://www.podifold.com
http://www.theminifo...62819-podifold/
https://www.instagram.com/podifold/

Some good info on there

 

 

And here is HubbaHubba's thread.
He converted from suck to blow through so someone who know both sides of the supercharger argument
http://www.theminifo...-the-first-one/

cheers for that mate i will have a read

[superteddyeddy]

Have you received your kit yet? If so could you upload some pictures off charger please.

[MrElliott]

I cant say that I have tried the Vmax kit but I fully recommend the guy who does them. Stuart Gurr has done a lot of work and helped me out a lot with my Mini and goes above and beyond the call of any regular Mini/classic car specialist. He has been doing these kits for ages and really knows his stuff. He is also the one who sold Mighty Car Mods their supercharger with good results.

 

https://www.youtube....muWRqckXHCYkabS

Edited by MrElliott, 26 July 2016 - 08:16 PM.

[Torgo]

I'm currently in the process of building an engine with the Vmaxscarts Dcoe Supercharger, Progress is slow at the moment but I have a thread on the build:

http://www.theminifo...charged-1293cc/

 

 

The kit looks amazing (I spend a lot of time looking at it in the garage), and Stuart is a top bloke, very helpful.

 

I cant wait to drive it :)