Hello,
Can someone please help me. I installed a new loom and it came with wires ready for a stereo. So I have bought a unit along with a harness and a harness adapter to connect to the loom. The problem Im having is that I don't know what wires connect to what on the loom. If you look at the photos you can see what I have.
I have found the speaker cables, which is fine. Then on the other side of the harness adapter I have 5 wires that will correspond to 4 wires coming from the loom. On the harness I have:
Black - labeled - Chassis ground (12v-)
Red - labeled - 12v ignition
Blue - labeled - power antena
Yellow - labeled - 12v battery constant
Orange - labeled - illumination (which doesn't carry on through to anything on the stereo harness so i guess is useless)
Then coming from the loom I have 4 wires, 3 in one sheath and one separate
sheath:
Green
Purple
Black
Separate:
Black
The antena I bought has a connection that seems to go straight into the back of the stereo unit
So here is my question:
Which of the wires in the harness adapter connects to which of the wires in the loom?
Do I have everything I need here for the unit to work?
Another couple of questions I had were:
Will my stereo have a memory so that it can save presets?
Will the unit turn on and off with the ignition?
will my antenna go up and down with the ignition?
What is the orange illumination wire?
Thank you so much for your help
Oli
IMG_1457.JPG 31.65K 7 downloads IMG_1458.JPG 32.36K 7 downloads Screen Shot 2016-09-20 at 18.54.07.png 474.53K 9 downloads Screen Shot 2016-09-20 at 18.54.17.png 467.01K 4 downloads
Edited by Oli_Bell, 20 September 2016 - 05:55 PM.