4 replies to this topic

[galpa]

Hi all as the title says I've got a problem with my speakers

I've checked all cables but still no luck, when I turn ignition off, or just the stero, there's a pop through all amp powered speakers.

What could be the problem?
And what other things should I check?

I've got two up front and a sub that's effected.

Noticed that the only thing that seems off are my rca cables are a bit worn. Would this cause this type of problem?

Thanks!

Edited by galpa, 29 September 2016 - 05:27 PM.

[Richie83]

Where are the cables running? All together? Do you also have a good ground for the amp and headunit?

[galpa]

Where are the cables running? All together? Do you also have a good ground for the amp and headunit?

I've got the amp ground to the battery ground in the boot but I can't see where the stero is ground too. I've got two rca's and it's a 4 channel amp bridged for the sub.

[Richie83]

Does the remote wire power the amps on and off from the headunit? I.e they switch on when the headunit is on?

[galpa]

Does the remote wire power the amps on and off from the headunit? I.e they switch on when the headunit is on?

Yup. It was all working fine untill I had to take it all out to get to the battery. Then after re-installing it it's not been right.