6 replies to this topic

[maccers]

Have been running s/c 1293cc with custom fuel injection, ie not MPI stuff, using emerald ECU. Its been running 100% all ok for few years, but has developed a slightly high idle, 1500 to 2000 rpm, sometimes settling back to around 1100. It runs perfect apart from that.

 

Have not used it since around end November, started up almost first time, but then carried on running sweet the way it always does, but now just with a slight high idle. Oil pressure fine, coolant temp fine, everything just as it was but with this small issue now.

 

Any ideas?

[Steve220]

What's the emerald base idle set at in your map?

[minidaves]

Air leak somewhere

[Sprocket]

Air leak somewhere

 Check all rubber hoses and connections rubber is just not what it use to be these days

[Turbo Phil]

Air leak somewhere

 Check all rubber hoses and connections rubber is just not what it use to be these days

Exactly what my wife said when she found out she was pregnant.

Phil.

[minidaves]

lol thankfully the chinese dont make condoms

[ABZSupercooper]

could you post your emerald map base settings, I would like to check mine as I have an issue with rough idle / runing under 2000 revs