Jump to content


Photo

Dash Card / Shelf Fitting


  • Please log in to reply
4 replies to this topic

#1 matt050990

matt050990

    I have upside down nipples

  • Members
  • PipPipPipPipPipPipPip
  • 1,199 posts
  • Location: Ashford, Kent
  • Local Club: Currently Ridin' Solo :)

Posted 09 February 2017 - 09:57 PM

Hey all

Just ripped my dash out to go back to centre binnacle.

Purchased the card dash liners and foam shelf but it doesn't seem to fit very nicely.

The back pieces seem to be off shape and can't figure out the bottom shelf, does it sit below dash rail or does it need another shelf to raise it up?

Pictures of your dash liners close up would be great :)


Much ta
Matt

#2 greenmini1275

greenmini1275

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 348 posts
  • Location: Barnsley

Posted 09 February 2017 - 10:32 PM

Where did you get them from? I've done it recently, I got my stuff from P&L and although they look pretty good, if you closely it doesn't fit quite right. I've just accepted it for now, especially as I've stuck 15mm of closed cell foam soundproofing behind it. It's my air vent besels that don't sit quite right.

#3 matt050990

matt050990

    I have upside down nipples

  • Members
  • PipPipPipPipPipPipPip
  • 1,199 posts
  • Location: Ashford, Kent
  • Local Club: Currently Ridin' Solo :)

Posted 10 February 2017 - 10:35 AM

I got it from 'the headlining shop' on eBay. Looks like good quality stuff but just doesn't seem to fit right.

#4 greenmini1275

greenmini1275

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 348 posts
  • Location: Barnsley

Posted 10 February 2017 - 11:17 AM

You could always measure up and make your own. Some sort of moldable board covered in black vinyl should do the trick.

#5 matt050990

matt050990

    I have upside down nipples

  • Members
  • PipPipPipPipPipPipPip
  • 1,199 posts
  • Location: Ashford, Kent
  • Local Club: Currently Ridin' Solo :)

Posted 10 February 2017 - 12:53 PM

Yeah that's not a bad idea. I have the nice looking trim I brought, maybe I just stick that to a strong card like Base.

Ta mate




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users