15 replies to this topic

[Hegnirst]

My weber 40 set up as follows

 

on my MG metro 1275 ran 82hp at the flywheel a month a go,

on a swan neck manifold, so you can run without doing any bulkhead mods, which is great! (don't want to here what you think about swan necks thanks)

new linkage, its about a year old the weber i think, new trumpets on the back, new filter. set up by SMMC new filters, and new inlet to weber mounts.

has had a look over by SMMC to by Colin, in which has replugged the bottom galaries and clear them from silk.

 

I am open to sensible offers as it is a lovely conditioned weber!

these normally fetch about 250

 

looking for a HIF 44, so could always do a deal

 

thanks

Attached Files

•  16003322_10154896495739362_2599264301291901861_n.jpg   60.55K   53 downloads
•  16602618_10154973729659362_1750583654452375250_n.jpg   55.48K   51 downloads

[Hegnirst]

I've covered about 350 miles with this carb (still on car)

[dossy]

I've got a hiff44 on a manifold with K&N filter etc

Attached Files

•  IMG_3544.JPG   43.15K   16 downloads
•  IMG_3545.JPG   40.91K   9 downloads
•  IMG_3546.JPG   44.62K   12 downloads

[matt050990]

I've got a hif44 on manifold with k&n filter.

Open for a deal

[Hegnirst]

I've got a hiff44 on a manifold with K&N filter etc

Hi mate..

Could you pm me price details etc cheers mate

[Hegnirst]

I've got a hif44 on manifold with k&n filter.

Open for a deal

Hi mate would be looking at 100 quid towards a deal i reckon

[dossy]

I'd be up for a swap deal too. Where about are you mate?

[Hegnirst]

I'd be up for a swap deal too. Where about are you mate?

Hi mate. Droitwich dude pm with a pic of it if you can mate

Thanks

[dossy]

I'd be up for a swap deal too. Where about are you mate?

Hi mate. Droitwich dude pm with a pic of it if you can mate

Thanks

Mines the pictures above mate!

[slivers501]

Photos as requested mate

Attached Files

•  IMG_2812.JPG   62.82K   18 downloads
•  IMG_2813.JPG   62.41K   9 downloads

[minimotion]

Got a hiff 44 with new maniflow inlet never been used also a k&n again never been opened

[Hegnirst]

Got a hiff 44 with new maniflow inlet never been used also a k&n again never been opened

Got a photograph mate? And where are you locate?

Thanks

[Hegnirst]

Bump

[insyafiq]

Hello,

hi mate, you got a PM... 

Regards,
Syafiq

[Jukesr]

Ive got a brand new HIFF 44 ,  NEW K&N & MSD Stub stack on a metro inlet manifold.

 

I would want strait swop though.

 

I was pulling 79 BHP without the Stub Stack I recon this setup will match the Webber with the stub stack and is better for road driving.

 

im currently building a hill climbed mini so after Webber..

 

are you up for a trade ?