Jump to content


Photo
- - - - -

Vw 2.0 Swap Seems Possible


  • Please log in to reply
29 replies to this topic

#16 McMini 22

McMini 22

    Mini Mad

  • Members
  • PipPipPipPip
  • 289 posts
  • Location: East lothian

Posted 08 March 2017 - 08:57 AM

I am planning on using the Micra loom on mine and getting it running before I cut anything out. Then I will start removing wiring one system at a time. I will check everything still works after each system is removed.
I think this is a sensible approach as any problems with the running of the car will be down to the last piece of wiring removed.

#17 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 08 March 2017 - 11:38 AM

Exactly! Im supprised i even got this far, theres been times where im thinking, crap this isnt going to work and the whole front end is chopped into pieces hahahah.

#18 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 21 March 2017 - 12:35 AM

 

33373682431_89413cb3ce_k.jpgUntitled by derek klegraefe, on Flickr

 



#19 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 21 March 2017 - 12:36 AM

lol i figured out how to make the photos larger ugg



#20 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 21 March 2017 - 12:47 AM

33560799085_0a6ac3902a_k.jpgUntitled by derek klegraefe, on Flickr

 

33520183676_ddf05040dd_k.jpgUntitled by derek klegraefe, on Flickr

 

 

33177757270_9d12ea6a79_k.jpgUntitled by derek klegraefe, on Flickr

 

since last time, i managed to fit the whole wiring loom in the car and well hidden for the most part, car turns over but i still need to fit the gas tank and sending unit, next i fitted my omp seat and moved the gear selecter over for a nice snug fit as well as fitting my slider stick.  and finally this evening i fitted the vw heater core in the back seat, was the only place it would fit, very excited to have a heater that will work!!



#21 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 26 March 2017 - 02:02 PM

33495022592_038a2373c4_k.jpgUntitled by derek klegraefe, on Flickr

 

33651520955_58c9b33e50_k.jpgUntitled by derek klegraefe, on Flickr

 

32838109993_c9b4fb18ae_k.jpgUntitled by derek klegraefe, on Flickr

 

32838109943_0cc95c2c2b_k.jpgUntitled by derek klegraefe, on Flickr

 

32808972784_fd72a04ae4_k.jpgUntitled by derek klegraefe, on Flickr

 

33651520765_38a72076b5_z.jpgUntitled by derek klegraefe, on Flickr

 

fiddled with the gas tank, got the vw oem sending unit installed and the gas lines installed



#22 lawrence

lawrence

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,330 posts

Posted 26 March 2017 - 02:57 PM

Similar tank to mine, I had contemplated cutting a hole for a factory pump and sender also but decided to get an external pump to easy accessibility.

 

Looking good tho!



#23 Magneto

Magneto

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 889 posts
  • Location: Kansas City, USA
  • Local Club: KC MINI Club

Posted 26 March 2017 - 04:32 PM

How many gallons is that fuel tank?

Heater in the back seat...interesting.......

#24 998kid

998kid

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 473 posts
  • Location: Canvey Island, Essex
  • Local Club: Essex Mini Club

Posted 26 March 2017 - 10:02 PM

Have you fitted a hydro into a mini? If so you are my hero!

#25 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 26 March 2017 - 10:37 PM

Similar tank to mine, I had contemplated cutting a hole for a factory pump and sender also but decided to get an external pump to easy accessibility.
 
Looking good tho!


Yea cutting the whole was the scary part, i was scared to ruin a new tank real quick haha, i really wanted to use the factory vw pump and it works the gas gauge nicely. Had to go for it!!

#26 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 26 March 2017 - 10:43 PM

How many gallons is that fuel tank?

Heater in the back seat...interesting.......


Its a 10 gallon tank i got on ebay.

Yes the heater is in the back seat. I couldnt get it to fit behind the dash and i deff wanted an upgrade from the mini heater box, something with more blower action. But the long coolant hoses worry me as it might lose heat temp in cold conditions. Also i took the A/C part out of the heater core and jb welded the 2 halfs back together hahah

#27 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 26 March 2017 - 10:44 PM

Have you fitted a hydro into a mini? If so you are my hero!


Yes and it is so fun in wet and snow conditions hahah

#28 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 31 March 2017 - 01:16 AM

CAR HAS BEEN STARTED!!!

 

its straight piped as of now

its so loud and ignorant but she's a bad ******* hahaha

 

just waiting on drive shafts, should have them made up by next week then comes the 1st test drive... cannot wait!!

 

32933789573_5f58ebec28_k.jpgUntitled by derek klegraefe, on Flickr

 

look an extra break light!

 

and back in december when was the hell was i thinking

32110353583_cf572b007a_k.jpgUntitled by derek klegraefe, on Flickr



#29 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 09 April 2017 - 12:30 AM

moved the intake downwards and now my bonnet can close fully thank god. and built a back box muffler it was a little to loud but not to bad, I'm very pleased with how this turned out

 

33764106382_f2627dd17b_k.jpgUntitled by derek klegraefe, on Flickr

 

33108179353_e90c73d33d_k.jpgUntitled by derek klegraefe, on Flickr

 

33764125082_84bdaeb792_k.jpgUntitled by derek klegraefe, on Flickr

 

33764106432_0a7b81a947_k.jpgUntitled by derek klegraefe, on Flickr

 

33791352861_e893829c69_k.jpgUntitled by derek klegraefe, on Flickr

 

33108162383_8bbfe5b350_k.jpgUntitled by derek klegraefe, on Flickr

 

33108162373_137f427f71_k.jpgUntitled by derek klegraefe, on Flickr

 

33108162093_2efd41a92e_k.jpgUntitled by derek klegraefe, on Flickr

 

33920976485_a4c6537f7f_k.jpgUntitled by derek klegraefe, on Flickr

 

33920976615_77175c6ff8_k.jpgUntitled by derek klegraefe, on Flickr

 

33920976605_accc5ed25c_k.jpgUntitled by derek klegraefe, on Flickr

 

33077360304_7cfa56de21_k.jpgUntitled by derek klegraefe, on Flickr

 

33108174763_773a84d7e4_k.jpgUntitled by derek klegraefe, on Flickr

 

33535896790_faf8a31074_k.jpgUntitled by derek klegraefe, on Flickr

 

33791371361_84f9a701e0_k.jpgUntitled by derek klegraefe, on Flickr



#30 hotwheels

hotwheels

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Location: Pawtucket, RI

Posted 11 April 2019 - 02:28 AM

Started a new project. Yamaha R1. Motor up front but rwd.
https://youtu.be/w1ZMATDZfe0




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users