R1 Archless
Started by
JamesC
, Apr 29 2017 08:07 AM
Best Answer Mervyn , 29 April 2017 - 08:41 AM
No reason I can see that you couldn't run a promotive kit with 7.5 discs and 4.5x10" rims. The skinny tyres would be a little scary mind!
Merv
Go to the full post
5 replies to this topic
#1
Posted 29 April 2017 - 08:07 AM
Hi
I would like know if it is possible to fit an R1 engine conversion while keeping the body archless.
I have tried to find some information online but with no luck.
This is more of a general enquiry out of curiosity than a plan at the moment.
Thanks in advance.
James
I would like know if it is possible to fit an R1 engine conversion while keeping the body archless.
I have tried to find some information online but with no luck.
This is more of a general enquiry out of curiosity than a plan at the moment.
Thanks in advance.
James
#2
Posted 29 April 2017 - 08:41 AM Best Answer
No reason I can see that you couldn't run a promotive kit with 7.5 discs and 4.5x10" rims. The skinny tyres would be a little scary mind!
Merv
Merv
#3
Posted 29 April 2017 - 08:56 AM
I was going that route originally and the answer is yes but the width of the wheels as mentioned will be the biggest issue. 4.5" Cooper S rims will be fine. 4.5" will take 165 width tyres.
#4
Posted 29 April 2017 - 08:59 AM
Thank you both!
#5
Posted 29 April 2017 - 10:59 PM
Do it
#6
Posted 30 April 2017 - 08:50 AM
Do it
Haha! Maybe, still not sure on the final build and this would be different!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users