Jump to content


Photo

Tim Gauges


  • Please log in to reply
5 replies to this topic

#1 Anthony30

Anthony30

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,294 posts
  • Location: Rainhill,Merseyside
  • Local Club: N/A

Posted 16 May 2017 - 05:30 PM

Anyone bought a 'TIM 002' clock gauge?

 

http://www.burtonpow...ace-tim002.html

 

In the link above it shows a gauge with a black face, white numbers and needles.  The gauge they sent me has red needles.

 

http://www.larkspeed...24v-Black-52mm#

 

Is this how they come, or did they send me the wrong type?

 

 

 

:tumble:



#2 Anthony30

Anthony30

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,294 posts
  • Location: Rainhill,Merseyside
  • Local Club: N/A

Posted 16 May 2017 - 05:36 PM

I'm convinced they've sent me the wrong gauge now. Tim superdash 700001. O_O  >_<



#3 ukcooper

ukcooper

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,242 posts
  • Location: Stoke on Trent
  • Local Club: m'n'o

Posted 16 May 2017 - 06:55 PM

well that top link sez No Longer Available    http://www.burtonpow...ace-tim002.html

 

 

so dout your going get one from themselves 


Edited by ukcooper, 16 May 2017 - 06:58 PM.


#4 Anthony30

Anthony30

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,294 posts
  • Location: Rainhill,Merseyside
  • Local Club: N/A

Posted 16 May 2017 - 07:01 PM

well that top link sez No Longer Available    http://www.burtonpow...ace-tim002.html

 

 

so dout your going get one from themselves 

Was showing low stock yesterday. It's the one I bought. :highfive:



#5 Mervyn

Mervyn

    Mini Mad

  • TMF+ Member
  • PipPipPipPip
  • 118 posts
  • Location: Telford

Posted 18 May 2017 - 09:43 AM

it's easy enough to paint the needles if required. bit of a poor show though on Burton's part. but they've always come through for me in the past if I had any issues, good customer service



#6 Anthony30

Anthony30

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,294 posts
  • Location: Rainhill,Merseyside
  • Local Club: N/A

Posted 18 May 2017 - 07:04 PM

it's easy enough to paint the needles if required. bit of a poor show though on Burton's part. but they've always come through for me in the past if I had any issues, good customer service

They said it's not a problem, just send them back, and they will send me the correct one back, so can't argue with their customer service so far. 






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Mini Spares