9 replies to this topic

[Kevinmini]

Can I buy mpi (1998) front wings with the correct wheel arch size? no cutting involved just as they should be?

[RedRuby]

Don't think so.

[MacGyver]

No, they have to be cut.
The templates can be downloaded on Minispares site.
It's then possible to reinstall the lip and not cut off bits and weld a reinforcement. That way you avoid another rust trap.

Ben

[Fast Ivan]

Only if it's got sportspack arches will they need to be trimmed

[MacGyver]

Only if it's got sportspack arches will they need to be trimmed

Ah yes, just understood the question.
😀

[Kevinmini]

Yes sorry forgot to say - Sportspack, has anyone got a link on how to do this?

Best place for panels although I know this question will end up in a debate ........

[timmy850]

All the templates are here:

http://www.minispare...itting-template

[MacGyver]

M machine...

[pete l]

Careful with the pdf templates, not all printers print to scale, some are off by a few milimetres.

 

 

edit, just looked at the templates, they have scales so that they can be measured to make sure they printed at the right size.

Edited by pete l, 16 June 2017 - 07:30 AM.

[Steve220]

Yes sorry forgot to say - Sportspack, has anyone got a link on how to do this?
Best place for panels although I know this question will end up in a debate ........

For genuine, mini spares. For non-genuine, m-machine. I'd go genuine due to fitment.