Hi I want to fit led strip lights to my mini under the dash and under the rear seat. How do I go about this?
Fitting Led Strip Lights
Started by
Chesty2925
, Jul 09 2017 09:23 PM
7 replies to this topic
#1
Posted 09 July 2017 - 09:23 PM
#2
Posted 09 July 2017 - 09:35 PM
just wire them in via a voltage regulator. most are 12V
#3
Posted 10 July 2017 - 07:23 AM
Look on eBay for 12v LED RGB strips, here's one i picked at random
www.ebay.co.uk/itm/292113649499
You can choose any colour via the controller, and they're flexible and self adhesive , so easy to fit
Merv
www.ebay.co.uk/itm/292113649499
You can choose any colour via the controller, and they're flexible and self adhesive , so easy to fit
Merv
#4
Posted 30 July 2017 - 07:58 PM
All sorted thanks. For some reason they only come on and off with the driver door switch not the passenger and I still can't get the interior light to work but never mind.
#5
Posted 03 August 2017 - 10:46 AM
try the wiring the other way round of the leds as some used to be + - correct for them to work.
#6
Posted 29 December 2017 - 05:37 PM
Where is the best place to take the 12v feed from near the dash.?
#7
Posted 14 January 2018 - 10:17 PM
Its under the dash. From the doors under the carpet
#8
Posted 02 April 2018 - 04:55 PM
Ive never tried them, but have been kicking around the idea of adding a little strip of LED tape in my corners as a replacement for the bulbs.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users