Set the ride height to standard.
Solid mount the front sub-frame.
Fit adjustable tie bars.
Use 165 section Yokohamas on 10" or 12" wheels with wheels no wider than 5".
For damping use either a set of KYB Gas Adjust or Spax or GAZ adjustables.
Set front toe-out to 1 mm.
Fit 1.5 degree negative camber lower arms.
On the rear set zero to -0.5 degrees negative with 1 mm to 2 mm toe in.
Ensure all suspension bushes are in good condition.
I hope this helps. If done it will give good road-holding combined with excellent handling.
Once done do not drive faster than you know how to .
Hi Cooperman Could you explain why no wider than 5" alloys?