Jump to content


Photo

Fitting Lower Dash Rail


  • Please log in to reply
3 replies to this topic

#1 Jimbob98

Jimbob98

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 71 posts
  • Location: Stockton

Posted 03 August 2017 - 08:52 PM

Hi, as the title says, I'm in the process of putting the interior back in the car and I'm wondering do I glue the dash to the rail when refitting ?
It appears to have been bonded previously
Tia jim

#2 Ben_O

Ben_O

    Mill Road Garage

  • Paint Doctor
  • PipPipPipPipPipPipPipPipPipPip
  • 9,781 posts
  • Location: Isle of Wight

Posted 03 August 2017 - 09:14 PM

It should hook over the top, wrap round the underside and secure in with the switch panel and some screws in from the underside into spire clips either end



#3 Jimbob98

Jimbob98

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 71 posts
  • Location: Stockton

Posted 03 August 2017 - 09:17 PM

Thanks very much that makes sense.
Jim

#4 Alice Dooper

Alice Dooper

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 391 posts
  • Location: Co. Antrim
  • Local Club: Minis in Northern Ireland

Posted 03 August 2017 - 09:29 PM

The lower dash pad is usually stuck down with a bit of adhesive at either end. The switch panel will fairly hold the middle in.

Don’t go to mad with the adhesive in case the pad needs to come out in the future again.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users