151 replies to this topic

[Mini Waco]

Then back home, I had to tackle the Rotisserie once again as it simply was not operating as smooth as I would like.  So I braced up the boot area by going to the seat belt attach points and ran a center beam all the way through.  The Jig is working beautifully now with a bracing system included.. 

Attached Files

•  IMG_2881.jpg   68.67K   0 downloads
•  IMG_2879.jpg   69.97K   0 downloads
•  IMG_2423.jpg   102.28K   0 downloads

[Mini Waco]

Then I got bored because I had to save up for a welder.. so I got a little creative by painting a Mini on my shop door since it was rather boring in color....

Attached Files

•  IMG_3234.jpg   81.38K   0 downloads
•  IMG_3260.jpg   87.17K   0 downloads

Edited by Mini Waco, 01 February 2019 - 02:36 PM.