Check the condition of the fuel pump inertia kill switch. Known to break down intermittently .
16 replies to this topic
#16
Posted 12 February 2018 - 11:34 AM
#17
Posted 15 February 2018 - 01:41 AM
If the flywheel sensor is bad, there would be an erratic or no RPM reading while trying to start with the problem. The 3000 RPM idle sounds like a vacuum leak in the intake system. Check the brake servo booster and hose for leaks, the Thermac valve system and hoses on intake and the of the air filter housing, the hoses on the oil breathers on the cam timing cover and the clutch cover and finally the hoses going to charcoal canister and its purge control valve.
Everything you need to know is here:
http://www.miniscene...anual_92-96.pdf
Also tagged with one or more of these keywords: engine, electrical
Mini Technical Sections →
Problems, Questions and Technical →
Mini Spi Charging IssueStarted by Dutch_MiniSPI , Yesterday, 02:13 PM electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Main Dipped Beam Not Working - Just Before Mot :-(Started by Park , 24 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Milky Oil In Rocker After Not Draining Water Before Removing HeadStarted by jezjsa , 11 Mar 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Speeduino EcuStarted by cooperpooper , 09 Mar 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Smiths Electronic Speedo Accuracy?Started by chuee , 01 Mar 2024 electrical |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users