For sale I have a bonnet with chrome lip secondary catch, latch pin and bonnet prop. Was on my 1990 flame red but I believe the bonnet is from an spi or mpi as has the later prop stick and bonnet switch point. Paint isn't doing too good but looks like it might just be in the clear coat it's cracking so might get away with just a sand and buff. Did have issues with splitting around the hinge mounts but has some minivation strengthening brackets put on.
Looking for £35
Located in Swindon
http://imgur.com/JLHmrgb
http://imgur.com/l8FyXeo
http://imgur.com/z5Thbzi
http://imgur.com/gUhmJKK
http://imgur.com/WluunJv
Bonnet
Started by
Daniel_moody25
, Nov 01 2017 04:19 PM
4 replies to this topic
#1
Posted 01 November 2017 - 04:19 PM
#2
Posted 01 November 2017 - 09:37 PM
Daniel - not a SPI/MPI bonnet they had the catch close to the lock (on the O/S of the lock).
#3
Posted 01 November 2017 - 10:01 PM
Ah my bad, I know it's not the one meant to be on my car though
#4
Posted 10 November 2017 - 11:17 AM
Is the splitting near the hinge mounts bad or can you get away with just fitting it as is?
#5
Posted 10 November 2017 - 04:11 PM
There is a noticeable bend but probably doesn't help I have gas struts on my hinges. I did just fit as is and isn't too bad
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users