4 replies to this topic

[SomethingNew71]

Hey everyone, I have been really in the mood to spruce up my engine bay these days.  Doing some new breather work as well as thinking about getting some sort of fixed fuel rail for my dual HS2 setup.  Anyone have pictures or recommendations of fixed fuel rails they have on their classics?

[imack]

Got this on my twin hs4's, it's the standard bmc item for twin hs2's.

Attached Files

•  20170830_164210.jpg   61.78K   3 downloads
•  20170830_163912.jpg   69.66K   3 downloads

[SomethingNew71]

Got this on my twin hs4's, it's the standard bmc item for twin hs2's.

 

I saw this on 7ent and was considering it.  Looks really nice on your engine. Also, I LOVE that Valve Cover color.  I have the same VC still in the shiny aluminum finish.

[imack]

Got this on my twin hs4's, it's the standard bmc item for twin hs2's.

 
I saw this on 7ent and was considering it.  Looks really nice on your engine. Also, I LOVE that Valve Cover color.  I have the same VC still in the shiny aluminum finish.

Thanks for the kind comments. Valve cover was an experiment for a more retro look, I'd gone off the polished alloy look and I had a spare tatty corroded MG metro valve cover that I sprayed with wrinkle finish paint from a local accessory shop. It seems to be standing the test of time and not affected by heat or oil.
Have more recently added a home made vented to atmosphere breather to it which has successfully stopped any oil mist being blown out of the oil filler cap.

Attached Files

•  20170917_215152.jpg   57.36K   5 downloads

[SomethingNew71]

 

 

Got this on my twin hs4's, it's the standard bmc item for twin hs2's.

 
I saw this on 7ent and was considering it.  Looks really nice on your engine. Also, I LOVE that Valve Cover color.  I have the same VC still in the shiny aluminum finish.

 

Thanks for the kind comments. Valve cover was an experiment for a more retro look, I'd gone off the polished alloy look and I had a spare tatty corroded MG metro valve cover that I sprayed with wrinkle finish paint from a local accessory shop. It seems to be standing the test of time and not affected by heat or oil.
Have more recently added a home made vented to atmosphere breather to it which has successfully stopped any oil mist being blown out of the oil filler cap.

 

 
It all looks very clean.  Here is an in progress picture I took the other night(sorry it was so dark) of the oil catch system I am trying to set up.

 

 

 

Attached Files

•  IMG_0070.JPG   50.86K   3 downloads