Jump to content


Photo
- - - - -

Rear Subframe Assembly


  • Please log in to reply
2 replies to this topic

#1 MiniJimNI

MiniJimNI

    Mini Mad

  • Members
  • PipPipPipPip
  • 182 posts

Posted 17 November 2017 - 09:24 PM

Hey guys rebuilding my rear subframe but been a while since I disassembled it!

Anyone a good link or step by step to reassembly?

Also what all do I need for it? I have th following :

Subframe repainted
Radius arms rebuilt
Disc plates
Drum
Pads etc for the disc to be built again
Bolt assembly kit
Brake lines
Cones
Trumpets

What am I missing?

Edited by MiniJimNI, 17 November 2017 - 09:47 PM.


#2 sonikk4

sonikk4

    Twisted Paint Polisher!!!

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 15,884 posts
  • Name: Neil
  • Location: Oxfordshire

Posted 17 November 2017 - 09:46 PM

Quadrants, quadrant pins, flexi and rigid brake lines. Haynes manual.



#3 Retroman

Retroman

    One Carb Or Two?

  • Traders
  • PipPipPipPipPipPipPip
  • 967 posts
  • Location: Sunny Sabden
  • Local Club: CDMC

Posted 18 November 2017 - 03:25 PM

You will need some trunnion/mounting bushes, the front trunnion pins /nuts and some time

Wonder if the haynes manual has the get out clause ' reassemble in reverse order'

Wheel cylinders...and don't forget the clips

Hubs

I like to always use new cylinders/shoes/springs/adjusters/knuckles(genuine)/hub seal

you might also need the grease seals for each end of the radius arms.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users