If you change the ride height or it's had any knocks during it's life the alignment may be off from one side to the other.
Are the subframe mounts all in good condition, suspension bushes OK, steering rack bolted in tightly?
Caster And Tracking
Started by
Swifty75
, Nov 22 2017 03:52 PM
17 replies to this topic
#16
timmy850
-
- TMF+ Member
-
- 2,997 posts
Up Into Fourth
- Location: NSW, Australia
- Local Club: MITG
Posted 19 December 2017 - 05:34 AM
#17
Swift_General
-
- Members
-
- 870 posts
One Carb Or Two?
- Location: England
Posted 19 December 2017 - 07:05 AM
What are your new caster/camber/toe measurements?
#18
Swifty75
-
- Noobies
-
- 11 posts
Learner Driver
- Location: Sheffield
Posted 19 December 2017 - 03:53 PM
I should have asked for the measurement on what he had set it to.
The suspension bushes are all good, the rack is mounted correctly and the subframe mounts are in good order.
It must be the bottom arms ruining the camber as they said. I will have to get some and take it back to them to sort it out!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
