Whats a 1275 ported head worth?
Mini Head 1275
Started by
MASON1979
, Dec 30 2017 07:45 PM
Best Answer Northernpower , 31 December 2017 - 11:22 AM
This is not the section for valuations. If you have a head you want a value for you need to make a post on the Valuations section, to be eligible for this EITHER MAKE 150 POSTS OR BECOME A TMF+ MEMBER (it only costs £5). You will clearly see the rules state you also need to post pictures as well and I would also advise you to include the casting number. DO NOT MAKE ANY FURTHER POSTINGS TO THIS THREAD IT'S UNFAIR ON THE MEMBERS WHO HAVE PAID THEIR £5 FEE.
Go to the full post
-
This topic is locked
9 replies to this topic
#1
MASON1979
-
- TMF+ Member
-
- 37 posts
On The Road
- Location: Worcester
Posted 30 December 2017 - 07:45 PM
#2
Van13
-
- Members
-
- 314 posts
Speeding Along Now
- Location: England
- Local Club: Unknown
Posted 30 December 2017 - 07:47 PM
I have just just paid 175£ for one used no guarantee
#3
spraybeater
-
- Members
-
- 468 posts
Speeding Along Now
- Location: west yorkshire
- Local Club: Mcr
Posted 30 December 2017 - 07:56 PM
Whats a 1275 ported head worth?
I think you will find there is a section on the forum for valuations! and certain
rules apply. One of the mods will be along shortly to put you right.
Keeps it the same for everybody!!!!
#4
Turbo Phil
-
- TMF+ Member
-
- 2,418 posts
Up Into Fourth
- Location: Cumbria
- Local Club: Cumbria Classic Mini Club
Posted 30 December 2017 - 07:57 PM
Depends entirely on spec, condition and who did it.
Phil.
Phil.
#5
MASON1979
-
- TMF+ Member
-
- 37 posts
On The Road
- Location: Worcester
Posted 30 December 2017 - 08:21 PM
Iv got a cylinder head 1275 with a inlet valve of 35.7 any idea of identity i think been ported?
#6
Turbo Phil
-
- TMF+ Member
-
- 2,418 posts
Up Into Fourth
- Location: Cumbria
- Local Club: Cumbria Classic Mini Club
Posted 30 December 2017 - 08:32 PM
You might want to reply on your other thread mate, instead of starting the third one on the same subject.
Phil.
Phil.
#7
MASON1979
-
- TMF+ Member
-
- 37 posts
On The Road
- Location: Worcester
Posted 30 December 2017 - 10:15 PM
Iv got a cylinder head 1275 with a inlet valve of 35.7 any idea of identity i think been ported?
#8
MASON1979
-
- TMF+ Member
-
- 37 posts
On The Road
- Location: Worcester
Posted 30 December 2017 - 10:21 PM
I have just just paid 175£ for one used no guarantee
What spec was your if you dont mind me asking?
#9
Spider
-
- Admin
-
- 13,899 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 31 December 2017 - 12:09 AM
As Spraybeater kindly mentioned and hinted, this is not the valuations section.
#10
Northernpower
-
- Members
-
- 2,409 posts
Mr. 7-Port
- Name: Graham
- Location: North Yorkshire (God's County)
- Local Club: Its out there somewhere
Posted 31 December 2017 - 11:22 AM Best Answer
This is not the section for valuations. If you have a head you want a value for you need to make a post on the Valuations section, to be eligible for this EITHER MAKE 150 POSTS OR BECOME A TMF+ MEMBER (it only costs £5). You will clearly see the rules state you also need to post pictures as well and I would also advise you to include the casting number. DO NOT MAKE ANY FURTHER POSTINGS TO THIS THREAD IT'S UNFAIR ON THE MEMBERS WHO HAVE PAID THEIR £5 FEE.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
