Vinegar method works very well
Mine were in a worse state than yours I used twisted wire wheel on the outside fine wheel on the inside and as said a bit of wet n dry
Coat of primer paint and clear lacquer
I fully intend to paint afterwards. I have wire brushes for drill but don’t think any are fine. Have you got a link for the type you used?
https://www.bilthamb...eatments/deox-c
Can't recommend this stuff enough. Just chuck your hubs in and come back in a day or two and you're done.
I have read a few topics where people say it’s good stuff. I only need it for this little bit on the hub tho so bit reluctant at moment to buy it.
I’ve used citric acid diluted into a plastic container, warm water and brilliant for de rusting parts. Leave to soak for 24 hrs. Can buy it on eBay, and from our dim and distant school science lessons citric acid is the main ingredient in sherbet!
I’m
Sure we will have some sherbet lying round the house.
If you can put up with the smell ... molasses ...
or Deox-C .. no smell but don't leave cast metal in for too long.
How long is too long? When I have used vinegar in past, I’ve left stuff in for few days to a week
White vinegar.
That’s what I have used before on rest of my stuff. Works great