Attached Files
-
IMG_20180115_204429755.jpg 67.49K
1 downloads
-
IMG_20180115_204402888.jpg 65.05K
3 downloads
Primary Gear C Washer
Started by
MatthewsDad
, Jan 15 2018 09:05 PM
3 replies to this topic
#1
MatthewsDad
-
- TMF+ Member
-
- 730 posts
One Carb Or Two?
- Location: Warrington
Posted 15 January 2018 - 09:05 PM
I have about 12 thou end float on the primary gear, maybe more. Just wondering to what extent this might be accounted for by the wear on the C ring. How much slack can I expect to be taken up with a new washer and backing ring? Many thanks.
#2
nicklouse
-
- TMF+ Member
-
- 17,944 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 15 January 2018 - 09:13 PM
to give an idea measure the endfloat with the C washer both ways around the lesser number will be closer to the new parts.
#3
Spider
-
- Admin
-
- 13,929 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 16 January 2018 - 04:58 AM
Measure the step in the C Clip.
The C Clips these days seem soft and every one I've pulled off in the past 5 - 6 years looks that that.
#4
MatthewsDad
-
- TMF+ Member
-
- 730 posts
One Carb Or Two?
- Location: Warrington
Posted 16 January 2018 - 07:03 AM
Thanks both, I ought to have mentioned that the pics show either side of the washer. Pretty worn on both faces.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
