Maybe a strange request.
I'm wondering if anyone has a mk1 rear number holder fitted and wondered if they'd be kind enough to measure the distance as shown in pic so I can locate mine in the correct place before drilling
Thankyou in advance!
(P.s I have a later boot lid so niot pressed like above)
IMG_3359.JPG 64.49K
0 downloads
Folding Rear Number Plate Holder
Started by
merther
, Jan 19 2018 11:29 PM
1 reply to this topic
#1
Posted 19 January 2018 - 11:29 PM
#2
Posted 22 January 2018 - 03:06 PM
It's the distance between the TOP of the number plate and the boot lid top swage line that is important. I suspect that swage is the same on both styles of boot lid anyway, but 1/2" difference at the bottom of the plate on a MK3 boot lid will not notice, but at the top of the plate 1/2" will stand out like a sore thumb.
I would bolt the plate in relative to the top swage line.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users