6 replies to this topic

[j.gerbes]

Hi all, my 2000 Rover Mini left the factory with wiring for only two spot lamps.

 

I would like to upgrade to four spot lamps but am unsure what wiring will be required.

 

Minisport sell this wiring harness for 4 genuine Rover lamps, but what would happen with my current wiring for the 2 lamps? Is it a matter of removing the current wiring and replacing it with this harness?

 

Any advice would be greatly appreciated.

[ukcooper]

http://www.theminifo...d-new-releases/

give this guy a look or email


and look be hind ya grill the 4 port loom may be all ready in and it just be the plugs there


oh the outside pair off lights have a different part number to the inner pair off lights just a note

[j.gerbes]

http://www.theminifo...d-new-releases/

give this guy a look or email


and look be hind ya grill the 4 port loom may be all ready in and it just be the plugs there


oh the outside pair off lights have a different part number to the inner pair off lights just a note

 

Thanks, I'll message him.

Also, already checked. Unfortunately there are only the two connections.

[Steve220]

Are you looking for 4 driving lamps or installing front fogs?

[j.gerbes]

Are you looking for 4 driving lamps or installing front fogs?

Hey Steve, ideally 4 driving lamps

[Steve220]

Are you looking for 4 driving lamps or installing front fogs?

Hey Steve, ideally 4 driving lamps

I'd suggest setting up a relay to allow large amps and take a feed from the power feed off the starter motor and trigger from the original, otherwise you'll be drawing too much from the standard wiring.

[Kieranlee999]

 

 

Are you looking for 4 driving lamps or installing front fogs?

Hey Steve, ideally 4 driving lamps

I'd suggest setting up a relay to allow large amps and take a feed from the power feed off the starter motor and trigger from the original, otherwise you'll be drawing too much from the standard wiring.

 

Not sure if it will help :) i used this wiring diagram to wire up my two spot lights but have seen it posted on other threads of people saying do this twice for 4 spot lamps not to overload the relay :)