Got the 577 and applied it yesterday. Is it none drying? I ask as there was a bit of excess round the edge which isn't set. Does it need a lack of air to set?
Water Proof Threadlock
Started by
HUBBA.HUBBA
, Feb 22 2018 07:18 PM
19 replies to this topic
#16
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 27 February 2018 - 03:50 PM
#17
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 27 February 2018 - 04:21 PM
Scratch that. Bit the bullet and tried to give it a little turn. Nice and solid!
Edited by HUBBA.HUBBA, 27 February 2018 - 04:21 PM.
#18
hhhh
-
- Members
-
- 422 posts
Speeding Along Now
Posted 27 February 2018 - 06:02 PM
Got the 577 and applied it yesterday. Is it none drying? I ask as there was a bit of excess round the edge which isn't set. Does it need a lack of air to set?
Yes all methacrylate products are anaerobic. The tubes and bottles are actually porous.
#19
RooBoonix
-
- TMF+ Member
-
- 1,224 posts
One Carb Or Two?
- Location: Essex
Posted 27 February 2018 - 08:47 PM
Yes all methacrylate products are anaerobic. The tubes and bottles are actually porous.
Got the 577 and applied it yesterday. Is it none drying? I ask as there was a bit of excess round the edge which isn't set. Does it need a lack of air to set?
That's good to know, I knew they were anaerobic but I always wondered why they didn't go off in the bottle!
#20
MiniMoe2008
-
- Members
-
- 163 posts
Mini Mad
- Location: Waldfischbach
- Local Club: None Around Here
Posted 01 March 2018 - 01:11 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
