Jump to content


Photo

Sas Zinc Primer


  • Please log in to reply
4 replies to this topic

#1 mattmiglia

mattmiglia

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 515 posts
  • Location: West Midlands

Posted 13 March 2018 - 09:06 PM

Anyone got any good or bad experiences with SAS rattle can zinc primer? Seems a good price compared to the BH Electrox I have been using...

#2 Marco1972

Marco1972

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 822 posts
  • Location: Birmingham

Posted 13 March 2018 - 11:22 PM


Good product I only used this on both mine and my lads cars goes on well and keeps the rust away
as you say reasonably priced

#3 Mervyn

Mervyn

    Mini Mad

  • Members
  • PipPipPipPip
  • 256 posts
  • Location: Telford

Posted 14 March 2018 - 07:06 AM

Yes as a rattle can it seems fine, I've tried a few. Make sure you invert the can and spray a bit to clean after use as the nozzle is a bit naff.

As a side note the best brush on stuff I've used in seams etc is fosroc galvafroid. It's so full of zinc it separates out in the can overnight so needs a really good stir before every use. Works a treat along seams etc. It's not cheap but worth it

Merv

#4 Steve220

Steve220

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 4,877 posts
  • Location: Shropshire
  • Local Club: RAF Mini Club

Posted 14 March 2018 - 10:01 AM

Its very good!

AVOID zinc182. Utter crap.

#5 mattmiglia

mattmiglia

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 515 posts
  • Location: West Midlands

Posted 16 March 2018 - 01:50 PM

Thanks everyone

Edited by mattmiglia, 18 March 2018 - 09:08 PM.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users