Standard clutch master and slave cylinders needed for a verto clutch. Currently got the tin Lockheed unit. Does not need to be aesthetically pleasing, just after functional parts to get my project moving. Cheers!
Working Clutch Master And Slave Cylinders
Started by
_Ad_
, Mar 20 2018 09:15 PM
4 replies to this topic
#1
_Ad_
-
- Members
-
- 482 posts
Speeding Along Now
- Location: Newcastle Under Lyme, Staffordshire
- Local Club: Minis 'n' Oatcakes
Posted 20 March 2018 - 09:15 PM
#2
MIGLIACARS
-
- Traders
-
- 2,057 posts
Up Into Fourth
#3
_Ad_
-
- Members
-
- 482 posts
Speeding Along Now
- Location: Newcastle Under Lyme, Staffordshire
- Local Club: Minis 'n' Oatcakes
Posted 21 March 2018 - 09:30 PM
Thanks, if I was to buy these how quickly could you get them to me?
#4
GraemeC
-
- TMF+ Member
-
- 7,314 posts
Crazy About Mini's
- Location: Carnforth
Posted 22 March 2018 - 06:49 AM
What is wrong with your existing ones?
With hydraulic cylinders I would put a seal kit into what I have and if that doesn’t fix them, then buy new - who says secondhand will be any better or last very long?
With hydraulic cylinders I would put a seal kit into what I have and if that doesn’t fix them, then buy new - who says secondhand will be any better or last very long?
#5
_Ad_
-
- Members
-
- 482 posts
Speeding Along Now
- Location: Newcastle Under Lyme, Staffordshire
- Local Club: Minis 'n' Oatcakes
Posted 22 March 2018 - 08:34 AM
Pedal sticks to the floor and there is no action when pressed. Seized master cylinder I believe. The car has sat for 10 years and not been ran for over 4 so I just want a simple fix to get it from my current house to the one I am buying via flatbed truck then going to do a full restoration 👍🏻
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
