Jump to content


Photo

Supercharger Fuel Pump?


  • Please log in to reply
12 replies to this topic

#1 Xtashx

Xtashx

    Just On Tickover

  • Noobies
  • Pip
  • 9 posts
  • Location: Stourport
  • Local Club: Hilltop Minis of Malvern

Posted 29 March 2018 - 12:24 PM

What electric fuel pump do people use on there supercharged minis and do you run a regulator?

Edited by Xtashx, 29 March 2018 - 12:24 PM.


#2 jt19

jt19

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 703 posts
  • Location: Hertfordshire

Posted 29 March 2018 - 05:31 PM

I run a mpi pump and a turbo regulator in my turbo.

I'm sure you can use spi pump for up to 10psi.

#3 HUBBA.HUBBA

HUBBA.HUBBA

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,381 posts
  • Location: Sutton Coldfield
  • Local Club: Loan wolf

Posted 29 March 2018 - 05:47 PM

You have to run a regulator. Which type depends on if you are looking at blow or suck through set up. Pump type also depends on blow or suck.

#4 HUBBA.HUBBA

HUBBA.HUBBA

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,381 posts
  • Location: Sutton Coldfield
  • Local Club: Loan wolf

Posted 29 March 2018 - 05:50 PM

Also depends on carb or injection

#5 hazpalmer14

hazpalmer14

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 534 posts
  • Local Club: cumbria mini cruisers

Posted 29 March 2018 - 06:10 PM

Im using a facet solid state pump as a lift pump to a swirl pot and a injection pump off a mk1 golf cabrio i think. This is in a clubman estate and turbo

#6 Xtashx

Xtashx

    Just On Tickover

  • Noobies
  • Pip
  • 9 posts
  • Location: Stourport
  • Local Club: Hilltop Minis of Malvern

Posted 29 March 2018 - 06:46 PM

Its the setup with the charger at the back of the engine with a hif44 carb. Was going to get a facet fuel pump and regulator just not sure what sort of fuel pressure rating I require

#7 Turbo Phil

Turbo Phil

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,039 posts
  • Location: Cumbria
  • Local Club: Cumbria Classic Mini Club

Posted 29 March 2018 - 07:16 PM

If it's suck through (carb before charger) the Facet red top will be more than adequate. The regulator needs to be set about 3-4psi.

 

Phil.

 



#8 HUBBA.HUBBA

HUBBA.HUBBA

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,381 posts
  • Location: Sutton Coldfield
  • Local Club: Loan wolf

Posted 29 March 2018 - 08:06 PM

If it's suck through (carb before charger) the Facet red top will be more than adequate. The regulator needs to be set about 3-4psi.
 
Phil.

Plus 1. Also I'd get a malpassi filter reg

#9 Xtashx

Xtashx

    Just On Tickover

  • Noobies
  • Pip
  • 9 posts
  • Location: Stourport
  • Local Club: Hilltop Minis of Malvern

Posted 30 March 2018 - 07:20 AM

Many thanks guys Ill get one ordered

#10 REDICE

REDICE

    On The Road

  • Noobies
  • PipPip
  • 41 posts

Posted 15 May 2018 - 08:19 AM

good fuel pump for blow through 15psi boost??



#11 Turbo Phil

Turbo Phil

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,039 posts
  • Location: Cumbria
  • Local Club: Cumbria Classic Mini Club

Posted 15 May 2018 - 09:41 AM

Metro turbo type roller vane pump, or any other injection type pump. I sell one suitable if you're interested. http://www.turbo-mini.com/accessories/
 

Phil.

 



#12 HUBBA.HUBBA

HUBBA.HUBBA

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,381 posts
  • Location: Sutton Coldfield
  • Local Club: Loan wolf

Posted 16 May 2018 - 08:20 AM

I've got a Sytec low pressure injection pump on mine.

Attached File  Screenshot_20180516-091628.png   141.61K   0 downloads

Edited by HUBBA.HUBBA, 16 May 2018 - 08:20 AM.


#13 Chris.Williams

Chris.Williams

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 490 posts
  • Location: Matamata

Posted 30 May 2018 - 08:15 PM

I run one of these on mine https://www.minispar...px|Back to shop through one of these https://www.minispar...px|Back to shop with an inline one of these http://www.med-engin...-pressure-gauge
Works as it should 👍




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Mini Spares