Edited by Xtashx, 29 March 2018 - 12:24 PM.
Supercharger Fuel Pump?
Started by
Xtashx
, Mar 29 2018 12:24 PM
12 replies to this topic
#1
Xtashx
-
- Noobies
-
- 9 posts
Just On Tickover
- Location: Stourport
- Local Club: Hilltop Minis of Malvern
Posted 29 March 2018 - 12:24 PM
What electric fuel pump do people use on there supercharged minis and do you run a regulator?
#2
jt19
-
- Members
-
- 745 posts
One Carb Or Two?
- Location: Hertfordshire
Posted 29 March 2018 - 05:31 PM
I run a mpi pump and a turbo regulator in my turbo.
I'm sure you can use spi pump for up to 10psi.
I'm sure you can use spi pump for up to 10psi.
#3
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 29 March 2018 - 05:47 PM
You have to run a regulator. Which type depends on if you are looking at blow or suck through set up. Pump type also depends on blow or suck.
#4
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 29 March 2018 - 05:50 PM
Also depends on carb or injection
#5
hazpalmer14
-
- Members
-
- 682 posts
Super Mini Mad
- Local Club: cumbria mini cruisers
Posted 29 March 2018 - 06:10 PM
Im using a facet solid state pump as a lift pump to a swirl pot and a injection pump off a mk1 golf cabrio i think. This is in a clubman estate and turbo
#6
Xtashx
-
- Noobies
-
- 9 posts
Just On Tickover
- Location: Stourport
- Local Club: Hilltop Minis of Malvern
Posted 29 March 2018 - 06:46 PM
Its the setup with the charger at the back of the engine with a hif44 carb. Was going to get a facet fuel pump and regulator just not sure what sort of fuel pressure rating I require
#7
Turbo Phil
-
- TMF+ Member
-
- 2,418 posts
Up Into Fourth
- Location: Cumbria
- Local Club: Cumbria Classic Mini Club
Posted 29 March 2018 - 07:16 PM
If it's suck through (carb before charger) the Facet red top will be more than adequate. The regulator needs to be set about 3-4psi.
Phil.
#8
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 29 March 2018 - 08:06 PM
Plus 1. Also I'd get a malpassi filter regIf it's suck through (carb before charger) the Facet red top will be more than adequate. The regulator needs to be set about 3-4psi.
Phil.
#9
Xtashx
-
- Noobies
-
- 9 posts
Just On Tickover
- Location: Stourport
- Local Club: Hilltop Minis of Malvern
Posted 30 March 2018 - 07:20 AM
Many thanks guys Ill get one ordered
#10
REDICE
-
- Noobies
-
- 97 posts
Stage One Kit Fitted
- Location: Auckland
Posted 15 May 2018 - 08:19 AM
good fuel pump for blow through 15psi boost??
#11
Turbo Phil
-
- TMF+ Member
-
- 2,418 posts
Up Into Fourth
- Location: Cumbria
- Local Club: Cumbria Classic Mini Club
Posted 15 May 2018 - 09:41 AM
Metro turbo type roller vane pump, or any other injection type pump. I sell one suitable if you're interested. http://www.turbo-mini.com/accessories/
Phil.
#12
HUBBA.HUBBA
-
- TMF+ Member
-
- 2,823 posts
Up Into Fourth
- Location: Sutton Coldfield
- Local Club: Loan wolf
Posted 16 May 2018 - 08:20 AM
I've got a Sytec low pressure injection pump on mine.
Screenshot_20180516-091628.png 141.61K
1 downloads
Screenshot_20180516-091628.png 141.61K
1 downloads
Edited by HUBBA.HUBBA, 16 May 2018 - 08:20 AM.
#13
Chris.Williams
-
- Members
-
- 679 posts
Super Mini Mad
- Location: Matamata
Posted 30 May 2018 - 08:15 PM
I run one of these on mine https://www.minispar...px|Back to shop through one of these https://www.minispar...px|Back to shop with an inline one of these http://www.med-engin...-pressure-gauge
Works as it should ?
Works as it should ?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
